A study of the handling qualities of large airplanes in the approach and landing flight phase was performed. An in-flight simulation experiment utilizing the USAF/Calspan Total In-Flight simulator was performed. A one- million pound statically-unstable delta-wing airplane model was used as a baseline about which variations were made. The primary variables were relative pilot position with respect to center of rotation, command path time delays and phase shifts, augmentation schemes and levels of augmentation. The experiment design, its conduct and analysis of the data are described. Results indicate that the approach and landing task with large airplanes is a low bandwidth task. Low equivalent short period frequencies and relatively long time delays can be tolerated only when the pilot is located a considerable distance forward of the center of rotation. As the pilot position is moved aft towards and then behind the center of rotation, as is the space shuttle, pilot ratings are degraded. A multi-loop analysis of pitch attitude and altitude control gave insight into this pilot position phenomenon. The control problem experienced by the pilots, when seated behind the center of rotation, tended to occur at low altitude when they were using visual cues of rate of sink and altitude. These configurations also lack the initial normal acceleration cue from pitch acceleration that conventional large airplane configurations possess. A direct lift controller improved final flight path control of these shuttle-like configurations.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    In-Flight Investigation of the Effects of Pilot Location and Control System Design on Airplane Flying Qualities for Approach and Landing


    Contributors:

    Publication date :

    1981


    Size :

    211 pages


    Type of media :

    Report


    Type of material :

    No indication


    Language :

    English