A study has been conducted for NASA Glenn Research Center under contract NNC10BA05B, Task NNC11TA80T to identify beneficial arrangements of the turboshaft engine, transmissions and related systems within the propulsion pod nacelle of NASA's Large Civil Tilt-Rotor 2nd iteration (LCTR2) vehicle. Propulsion pod layouts were used to investigate potential advantages, disadvantages, as well as constraints of various arrangements assuming front or aft shafted engines. Results from previous NASA LCTR2 propulsion system studies and tasks performed by Boeing under NASA contracts are used as the basis for this study. This configuration consists of two Fixed Geometry Variable Speed Power Turbine Engines and related drive and rotor systems (per nacelle) arranged in tilting nacelles near the wing tip. Entry-into-service (EIS) 2035 technology is assumed for both the engine and drive systems. The variable speed rotor system changes from 100 percent speed for hover to 54 percent speed for cruise by the means of a two speed gearbox concept developed under previous NASA contracts. Propulsion and drive system configurations that resulted in minimum vehicle gross weight were identified in previous work and used here. Results reported in this study illustrate that a forward shafted engine has a slight weight benefit over an aft shafted engine for the LCTR2 vehicle. Although the aft shafted engines provide a more controlled and centered CG (between hover and cruise), the length of the long rotor shaft and complicated engine exhaust arrangement outweighed the potential benefits. A Multi-Disciplinary Analysis and Optimization (MDAO) approach for transmission sizing was also explored for this study. This tool offers quick analysis of gear loads, bearing lives, efficiencies, etc., through use of commercially available RomaxDESIGNER software. The goal was to create quick methods to explore various concept models. The output results from RomaxDESIGNER have been successfully linked to Boeing spreadsheets that generate gear tooth geometry in Catia 3D environment. Another initial goal was to link information from RomaxDESIGNER (such as hp, rpm, gear ratio) to populate Boeing's parametric weight spreadsheet and create an automated method to estimate drive system weight. This was only partially achieved due to the variety of weight models, number of manual inputs, and qualitative assessments required. A simplified weight spreadsheet was used with data inputs from RomaxDESIGNER along with manual inputs to perform rough weight calculations.


    Access

    Access via TIB

    Check availability in my library


    Export, share and cite



    Title :

    Engine Power Turbine and Propulsion Pod Arrangement Study


    Contributors:
    Robuck, Mark (author) / Zhang, Yiyi (author)

    Publication date :

    2014-06-01


    Type of media :

    Report


    Type of material :

    No indication


    Language :

    English




    Propulsion system arrangement for turbofan gas turbine engine

    ECKETT CHRISTOPHER A / SUCIU GABRIEL L | European Patent Office | 2023

    Free access

    PROPULSION SYSTEM ARRANGEMENT FOR TURBOFAN GAS TURBINE ENGINE

    ECKETT CHRISTOPHER A / SUCIU GABRIEL L | European Patent Office | 2018

    Free access

    Propulsion system arrangement for turbofan gas turbine engine

    ECKETT CHRISTOPHER A / SUCIU GABRIEL L | European Patent Office | 2021

    Free access

    PROPULSION SYSTEM ARRANGEMENT FOR TURBOFAN GAS TURBINE ENGINE

    ECKETT CHRISTOPHER A / SUCIU GABRIEL L | European Patent Office | 2022

    Free access

    PROPULSION SYSTEM ARRANGEMENT FOR TURBOFAN GAS TURBINE ENGINE

    ECKETT CHRISTOPHER A / SUCIU GABRIEL L | European Patent Office | 2020

    Free access