This paper describes Finite Element (FE) analyses of cold-rolled aluminium alloy 5052-H26 columns subjected to distortional buckling using the program ABAQUS. The results of distortional buckling tests in an experimental program performed at the University of Sydney are fully described in a companion paper. The simulation results are compared and validated against the distortional buckling tests. In detailed FE models, effects of such input parameters as mechanical properties of flat and corner areas and initial geometric imperfections are considered. The FE ultimate strengths are in good agreement with the experimental results. Therefore, the FE analysis can be used to predict the ultimate loads of cold-rolled aluminium alloy members including the post-buckling behaviour of thin-walled aluminium sections in compression subjected to distortional buckling. It is indicated that the reliable FE models in this study can be used to extend data range for future calibration of distortional buckling strength curve for design of cold-rolled aluminium columns.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical Simulation of Cold-Rolled Aluminium Alloy 5052 Columns Subjected to Distortional Buckling


    Weitere Titelangaben:

    Lecture Notes in Civil Engineering


    Beteiligte:
    Ha-Minh, Cuong (Herausgeber:in) / Dao, Dong Van (Herausgeber:in) / Benboudjema, Farid (Herausgeber:in) / Derrible, Sybil (Herausgeber:in) / Huynh, Dat Vu Khoa (Herausgeber:in) / Tang, Anh Minh (Herausgeber:in) / Huynh, Le Anh Thi (Autor:in) / Pham, Cao Hung (Autor:in) / Rasmussen, Kim J. R. (Autor:in)


    Erscheinungsdatum :

    2019-10-11


    Format / Umfang :

    6 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Experimental Investigation of Cold-Rolled Aluminium Alloy 5052 Columns Subjected to Distortional Buckling

    Huynh, Le Anh Thi / Pham, Cao Hung / Rasmussen, Kim J. R. | Springer Verlag | 2019


    Finite Element Simulation of Member Buckling of Cold-rolled Aluminium Alloy 5052 Channel Columns

    Pham, Ngoc Hieu / Pham, Cao Hung / Rasmussen, Kim J. R. | Springer Verlag | 2019


    Lateral Buckling Tests of Cold-rolled Aluminium Alloy 5052 Zee Beams

    Pham, Ngoc Hieu / Pham, Cao Hung / Rasmussen, Kim J. R. | Springer Verlag | 2019