Cutouts are widely used to accommodate windows, openings for access purposes, or fasteners in the primary structural parts of airplanes. The presence of cutouts in composite panels results in stress or strain concentrations, leading to potentially reduced load-carrying capacity. Steering tows around cutouts using emerging techniques in three-dimensional (3-D) printing and advanced fiber placement can potentially alleviate such problems. Continuous tow steering around cutouts also eliminates fiber cutting, thereby precluding ply-level 3-D stress concentration, which could otherwise lead to delamination-induced damage. This work examines stress and strain concentrations, using continuous tow steering, around a representative wingbox access hole. Buckling response under compression loading together with stress and strain concentrations under both tensile and compression loads are examined. A steered configuration shows a 26% improvement in buckling performance in comparison with the equivalent straight-fiber configuration. Under tensile loading, the maximum stress and strain concentration factors around the cutout are 29 and 32% larger, respectively, for straight-fiber orientations than those with steered tows around the cutout. For the compression loading condition, the direct strain of the panel with straight-fiber orientations was found to be three times that of steered-fiber trajectories in the vicinity of the cutout.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Continuous Tow Steering Around an Elliptical Cutout in a Composite Panel


    Beteiligte:

    Erschienen in:

    AIAA Journal ; 59 , 12 ; 5117-5129


    Erscheinungsdatum :

    01.12.2021




    Medientyp :

    Aufsatz (Konferenz) , Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Continuous Tow Steering around an Elliptical Cut-out in a Composite Panel

    Zucco, Giovanni / Rouhi, Mohammad / Oliveri, Vincenzo et al. | AIAA | 2021


    CONTINUOUS TOW STEERING AROUND AN ELLIPTICAL CUT-OUT IN A COMPOSITE PANEL

    Zucco, Giovanni / Rouhi, Mohammad / Oliveri, Vincenzo et al. | TIBKAT | 2021


    Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout

    Oterkus, Erkan / Madenci, Erdogan / Nemeth, Michael | AIAA | 2005