The presentation describes the development and design of a spring & damper element in ring form made of elastomer. It was developed to protect sensitive equipment against high dynamic random loads by assuring supercritical dynamic operation of the resonator symmetrically built with help of two of these bearing elements. The special feature of this elastomer bushing is that its spring stiffness can be adjusted by simple means: One ring element is made of 12 segments, so that by changing the number of segments used its spring stiffness can be coarsely adjusted. A fine tuning can then be undertaken by preloading the elastomer elements within the bushing. In total, the axial as well as the radial spring stiffness can be synchronously adjusted by a factor of eight. Furthermore, it is being described how a similar axial and radial stiffness was obtained by using the parameter optimizer of the commercial FEM software Creo Simulate. In addition, Geometric nonlinear analyses have been undertaken to compute the effect of elastomer deformation by preloads on the stiffness of the spring/damper element. Finally, the obtained field of characteristic spring stiffness curves of the bushing is shown. ; Die Präsentation beschreibt die Entwicklung und den konstruktiven Aufbau eines ringförmigen Feder-/Dämpferelementes aus einem Elastomer. Es wurde entwickelt, um empfindliche Ausrüstung gegen hohe dynamische Random-Lasten zu schützen. Dazu wird der Resonator, der symmetrisch mit Hilfe zweier dieser Elemente gebildet wird, dynamisch überkritisch betrieben. Das besondere dieses Elastomerlagers ist, dass seine Federsteifigkeit einfach eingestellt bzw. justiert werden kann. Ein Ringelement besteht aus 12 Einzelsegmenten; durch unterschiedliche Bestückung kann die Federsteifigkeit grob voreingestellt werden. Die Feineinstellung auf eine bestimmte Ziel-Eigenfrequenz wird durch Vorspannung der einzelnen Elastomersegmente erreicht. Insgesamt kann dadurch die Federsteifigkeit sowohl in axialer als auch in radialer Richtung synchron um ...


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Draft design of an elastomer spring-/damper element with adjustable spring stiffness for a tunable resonator


    Beteiligte:
    Jakel, Roland (Autor:in)

    Erscheinungsdatum :

    05.07.2019


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Deutsch



    Klassifikation :

    DDC:    620 / 621 / 629



    ELASTOMER SPRING/DAMPER

    HADI ROD | Europäisches Patentamt | 2020

    Freier Zugriff

    Elastomer spring/damper

    HADI ROD | Europäisches Patentamt | 2023

    Freier Zugriff

    Height-adjustable spring-damper system for a vehicle

    BRANDSTETTER SIEGFRIED / FORSTER GERHARD / SCHATZBERGER UWE | Europäisches Patentamt | 2024

    Freier Zugriff

    SPRING DAMPER BEARING AND SPRING DAMPER BEARING ASSEMBLY

    YAN LIUQING / WU YONG / YU XIANGYANG et al. | Europäisches Patentamt | 2022

    Freier Zugriff

    SPRING DAMPER BEARING AND SPRING DAMPER BEARING ASSEMBLY

    YAN LIUQING / WU YONG / YU XIANGYANG et al. | Europäisches Patentamt | 2020

    Freier Zugriff