This paper discusses comparison of unmodulated current controls in PMSM, more specifically, on-off, sliding mode, predictive and hybrid controls. The purpose of this study is to select the most appropriate control technique to be adopted. The comparison method is preceded by modeling the motor and entering the values of the motor parameters. PI control is used for speed control and zero d-axis current is employed. Furthermore, performing simulation for each type ofthe selected current controls and analyzing their responses in terms of dq and abc currents, q-axis current response with step reference, as well as THD. Simulation results show that the on-off control gives the best overall performance based on its abc-axis current ripple and THD at large load torque. The hybrid control shows the best response occurring only at the fastest transient time of q-axis current but its response exhibits bad qualities compared with other controls. The predictive control yields the best responses offering the smallest d-axis ripple current and THD at small load torque condition. The sliding mode control, however, does not exhibit any prominent performance compared to the others. Results presented in this paper further indicate that for the PMSM used in the simulation the most appropriate control is the predictive control.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Comparison of Unmodulated Current Control Characteristics of Permanent Magnet Synchronous Motor


    Beteiligte:
    Muqorobin, Anwar (Autor:in) / Irasari, Pudji (Autor:in) / Taufik, Taufik (Autor:in)

    Erscheinungsdatum :

    19.12.2014


    Anmerkungen:

    doi:10.14203/j.mev.2014.v5.115-122
    Journal of Mechatronics, Electrical Power, and Vehicular Technology; Vol 5, No 2 (2014); 115-122 ; Journal of Mechatronics, Electrical Power and Vehicular Technology; Vol 5, No 2 (2014); 115-122 ; 2088-6985 ; 2087-3379



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch


    Klassifikation :

    DDC:    629



    Minimum current control for permanent-magnet synchronous motor

    Su Dan-dan / Dong Yu-gang / Zhang Cheng-ning | IEEE | 2014


    Control method and device of permanent magnet synchronous motor, permanent magnet synchronous motor and medium

    CHEN YIDONG / YANG RIYANG / FU XIAOYAN | Europäisches Patentamt | 2023

    Freier Zugriff

    CONTROL METHOD FOR PERMANENT MAGNET SYNCHRONOUS MOTOR

    Europäisches Patentamt | 2016

    Freier Zugriff

    Simplified Current Control Method for FOC of Permanent Magnet Synchronous Motor

    Masuti, Amit Mallikarjun / Angadi, Sachin / Raju, A. B. et al. | Springer Verlag | 2023