[Objectives] At present, conventional design is limited to parent ship design space, and cannot drive ship hull design using as few parameters as possible. In order to solve the above problems, [Methods] by combining the draught function with NURBS, a ship hull surface self-design method based on vertical parameterization is proposed. In this method, the waterline is designated as the basic design unit; the bottom flat end line, designed waterline, stem and stern contours, side flat end line and maximum section line are designated as the characteristic constraints of the ship hull; and the draught function values corresponding to the characteristic parameters are designated as the design objectives. In this way, a waterline approximation model is built, and an evolutionary algorithm can be used to solve the approximation model. Finally, the ship hull surface is generated on the basis of the waterline using the NURBS skinning technique.[Results] The design examples of the characteristic curves of the full-scale ship hull surface indicate the practicable and advanced nature of this method.[Conclusions] The hull surface can be designed with as little data as possible using this method, making it much more suitable for the self-design of new ship forms.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Lightweight hull surface self-design vertical parameterization method based on NURBS


    Beteiligte:
    ZHANG Yanru (Autor:in) / LIN Yan (Autor:in) / LU Conghong (Autor:in) / JI Zhuoshang (Autor:in)


    Erscheinungsdatum :

    2017




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    NURBS skinning surface for ship hull design based on new parameterization method

    Shamsuddin, S.M. / Ahmed, M.A. / Samian, Y. | Tema Archiv | 2006


    Geometry modeling of ship hull based on NURBS

    Wang, Hu / Zou, Zaojian | Tema Archiv | 2007


    Geometry Modeling of Ship Hull Based on NURBS

    Wang, Hu | Online Contents | 2007


    Geometry Modeling of Ship Hull Based on NURBS

    Wang, Hu / Zou, Zaojian / Shanghai Jiao Tong University | Taylor & Francis Verlag | 2007


    Parameterization of trimmed NURBS geometries for mesh deformation

    Siggel, Martin / Stollenwerk, Tobias | Deutsches Zentrum für Luft- und Raumfahrt (DLR) | 2016

    Freier Zugriff