Wind speed and direction are critical meteorological elements. Multi-rotor unmanned aerial vehicles UAVs are widely used as a premium payload platform in meteorological monitoring. The meteorological UAV is able to improve the spatial and temporal resolution of the elements collected. However, during wind measurement missions, the installed anemometers are susceptible to interference caused by rotor turbulence. This paper puts forward a wind pressure orthogonal decomposition (WPOD) strategy to overcome this limitation in three ways: the location of the sensors, a new wind measurement method, and supporting equipment. A weak turbulence zone (WTZ) is found around the airframe, where the turbulence strength decays rapidly and is more suitable for installing wind measurement sensors. For the sensors to match the spatial structure of this area, a WPOD wind measurement method is proposed. An anemometer based on this principle was mounted on a quadrotor UAV to build a wind measurement system. Compared with a standard anemometer, this system has satisfactory performance. Analysis of the resulting data indicates that the error of the system is ±0.3 m/s and ±2° under hovering conditions and ±0.7 m/s and ±5° under moving conditions. In summary, WPOD points to a new orientation for wind measurement under a small spatial–temporal scale.
Wind Pressure Orthogonal Decomposition Anemometer: A Wind Measurement Device for Multi-Rotor UAVs
2023
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Metadata by DOAJ is licensed under CC BY-SA 1.0
Coordinated Transportation of Tethered Multi-rotor UAVs Under Wind Disturbance
Springer Verlag | 2025
|Ground wind measurements and anemometer response
NTRS | 1966
|Ground wind measurements and anemometer response
NTRS | 1966
|Wind comparison analysis of pibal versus anemometer
NTRS | 1967
|Wind Tunnel Investigation of an Ultrasonic Anemometer
British Library Conference Proceedings | 2001
|