The purpose of the research activity is to identify the best configuration of piezoelectric (PZT) elements for a typical condition of wing aeroelastic instability. The attention is mainly focused on the flutter behavior of the structure. However, the model can be extended with low-impact adjustments to other loading conditions.

    Design/methodology/approach

    The dynamic system consists of a thin-walled beam, whose longitudinal faces are perfectly bonded by two PZT layers and it is excited by the aerodynamic forces to assume a simple harmonic oscillation motion. The equations of motion are obtained using an energy approach by applying the extended Hamilton principle in conjunction with the Ritz method for modal approximation. The external forces acting on the system are modeled according to the Theodorsen derivation.

    Findings

    The flutter speed and the power generated from flutter oscillations can be increased by acting on the length of the PZT elements. The results show that the model with the beam substrate totally covered by the PZT in its longitudinal direction is more effective for low electrical resistance, whereas for high resistance values, the beam substrate that is partially covered provides the best results. Furthermore, both flutter postponement and energy harvesting functions can be maximized by properly choosing the beam stiffness ratio.

    Practical Implications

    Depending on the parameter we want to maximize, that is, the flutter speed or the energy harvested, it is possible to identify the best system configuration from the analysis presented in this paper.

    Originality/value

    The originality of the work appears in the sensitivity study performed on a three-dimensional piezo-aeroelastic fluttering wing, whose optimal behavior in terms of flutter postponement and power generation is analyzed using two distinct parameters, the beam stiffness ratio and the PZT length.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Parametric analysis of a fluttering piezoelectric wing


    Beteiligte:
    Bruni, Claudia (Autor:in) / Cestino, Enrico (Autor:in) / Frulla, Giacomo (Autor:in)


    Erscheinungsdatum :

    03.05.2016


    Format / Umfang :

    7 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Minitype fluttering-wing aircraft

    WANG ZHICHENG | Europäisches Patentamt | 2015

    Freier Zugriff

    Fluttering fountains

    Casperson, L.W. | Online Contents | 1993


    Computations of Active Open-Loop Flow Control on a Fluttering Wing

    Seidel, Jurgen / Fagley, Casey P. / McLaughlin, Thomas E. | AIAA | 2015


    Multi-Resolution Dynamic Mode Decomposition Analysis of the Pressure Profile Over a Fluttering Wing

    Gonzales, Joseph / Sakaue, Hirotaka / Jemcov, Aleksandar | TIBKAT | 2022


    Multi-Resolution Dynamic Mode Decomposition Analysis of the Pressure Profile Over a Fluttering Wing

    Gonzales, Joseph / Sakaue, Hirotaka / Jemcov, Aleksandar | AIAA | 2022