The main purpose of the study was mechanical designing, simulation and manufacturing process for a new model of octocopter V-frame and to achieve simple manufacturing with 3D printing technology. Moreover, the octocopter PID controller was simulated on the Simulink environment to get performance on the roll and pitch angle control.

    Design/methodology/approach

    Octocopter is one kind of multirotor vehicle (a rotorcraft with more than two rotors), that has lately gained a lot of attention for both the scientific and commercial spheres. With a greater number of rotors, the multirotor is very maneuverable and robust. Multi-copter makes an important contribution to the technological revolution in the military, industry, transportation, mapping and especially agriculture. Nowadays, we are heading to the four-industrial revolutions as well as the new technological application in the agricultural field such as precision agriculture, mapping and surveillance. Due to recently advanced technology about sensors, electronics, 3D printing, battery with high performance, multi-copter can be manufactured at low cost.

    Findings

    The V-frame octocopter was chosen to design in this paper; it had better performance scores including high redundancy rotors, high payload capability and affordable cost than another multi-copter family. The V-frame octocopter increasing freedom field of view of the camera was considered to place the camera position in the front of the drone.

    Research limitations/implications

    For the future aspects, the mechanical structure of the octocopter could be improved by using more advanced metal 3D printing to produce the aluminum or titan alloy materials for lighter and more rigid compared with ABS material, and finally the assembly to the real test.

    Originality/value

    The study shows the new platform of the V-frame octocopter kinematics analysis, designed on the CAD software, with some important mechanical parts using FEM analysis to find the highest stress and displacement under high load applied, the result of all connecting the joints 3D printing part is completely safe. Mechanical parts were manufactured by using 3D printing technology and CNC milling. Moreover, the study has shown V-frame octocopter simulation based on Simulink using the second method Ziegler- Nichols to find suitable parameters of the PID controller for roll and pitch angle. Using the block simulation is good for implementing and fast checking the new algorithm when building the new platform of the robot.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of a novel V-frame octocopter: design, kinematic analysis and simulation using PID controllers with Ziegler Nichols tuning method


    Weitere Titelangaben:

    Development of a novel V-frame Octocopter


    Beteiligte:
    Minh, Tri Bien (Autor:in) / Vo, Hien (Autor:in) / Hua, Luan Thanh (Autor:in)


    Erscheinungsdatum :

    29.06.2023


    Format / Umfang :

    21 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Relaxed Ziegler-Nichols closed loop tuning of PI controllers

    Haugen, Finn / Lie, Bernt | BASE | 2017

    Freier Zugriff

    OCTOCOPTER

    COVALENCO ANDREI | Europäisches Patentamt | 2018

    Freier Zugriff

    Desain PI Controller menggunakan Ziegler Nichols Tuning pada Proses Nonlinier Multivariabel

    Lestari, Poppy Dewi / Hadi, Abdul | BASE | 2012

    Freier Zugriff

    Robust Fractional-Order PI Controller with Ziegler-Nichols Rules

    Mazidah Tajjudin / Mohd Hezri Fazalul Rahiman / Norhashim Mohd Arshad et al. | BASE | 2013

    Freier Zugriff

    Nailed It: Autonomous Roofing with a Nailgun-Equipped Octocopter

    Romano, Matthew M. / Chen, Yuxin / Kuevor, Prince et al. | AIAA | 2021