After the elevator runs for a long time, the traction wheel groove will be excessively worn. If the wheel groove is worn to a certain extent and is not replaced, it will be dangerous. In practical application, it is found that the wear between the wheel grooves of the traction wheel is not uniform. Therefore, the traction wheel needs to be tested regularly for replacement. The detection methods in the prior art have high requirements for inspectors and rich experience; Secondly, the 1.25 times braking test requires the handling of weights, which is time-consuming and laborious, and the braking test has the possibility of no legal stop of the lift car, which has serious potential safety hazards. Moreover, the current inspection is only the confirmation of the traction wheel wear results, which cannot monitor the traction wheel wear process, nor predict the remaining service life of the traction wheel, that is, how long it can be used. With the development of visual recognition technology, it is possible to detect the traction wheel by visual recognition. The wheel groove part is reconstructed by visual recognition, and then the wear degree of the wheel groove can be analyzed. However, if 3D reconstruction is needed, the target needs to be photographed from multiple angles through the camera, which is far away from human eyes. Therefore, for the immovable camera, at least two cameras are required, but the angles between the two cameras, between the cameras and between the whole camera support and the installed elevator need to be accurately adjusted.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Research on Adjustable Camera Mounting Bracket for Monitoring the Elevator Traction Wheel Groove


    Beteiligte:
    Feng, Shuangchang (Autor:in) / Liang, Yanchun (Autor:in) / Xu, Haixiang (Autor:in) / Chen, Jie (Autor:in)


    Erscheinungsdatum :

    12.11.2021


    Format / Umfang :

    420676 byte




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Research on camera bracket for elevator traction wheel groove

    Feng, Shuangchang / Chen, Jie / Liang, Yanchun et al. | IEEE | 2021


    Omni-directional adjustable elevator door motor mounting bracket

    HUANG GUANGXING / HU PENGFEI / FENG SHIPING et al. | Europäisches Patentamt | 2024

    Freier Zugriff

    Safe and adjustable elevator traction sheave groove abrasion detection equipment

    FU JUNPING / CHEN DONGDONG | Europäisches Patentamt | 2022

    Freier Zugriff

    ADJUSTABLE BRACKET ELEVATOR GUIDE

    WANG YOULIN / ZHANG JIANHONG / YU CHENG et al. | Europäisches Patentamt | 2016

    Freier Zugriff

    Elevator system with mounting bracket

    D 'APIS ALESSANDRO / LOIACONO ROMEO | Europäisches Patentamt | 2023

    Freier Zugriff