A single element traction rig was used to measure the traction forces at the contact of a ball against a flat disc at room temperature under combined rolling and sliding. The load and speed conditions were selected to match those anticipated for bearing applications in adiabatic diesel engines. The test program showed that the magnitude of traction forces were almost the same for all the lubricants tested; a lubricant should, therefore, be selected on the basis of its ability to prevent wear of the contact surfaces. Traction vs. slide/roll ratio curves were similar to those for liquid lubricants but the traction forces were an order of magnitude higher. The test data was used to derive equations to predict traction force as a function of contact stress and rolling speed. Qualitative design guidelines for solid lubricated concentrated contacts are proposed.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Solid Lubrication Design Methodology


    Beteiligte:
    B. B. Aggarwal (Autor:in) / T. M. Yonushonis (Autor:in) / R. L. Bovenkerk (Autor:in)

    Erscheinungsdatum :

    1984


    Format / Umfang :

    112 pages


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Solid lubrication design methodology

    Aggarwal, B. B. / Yonushonis, T. M. / Bovenkerk, R. L. | NTRS | 1984


    Solid lubrication desgin methodology

    Aggarwal, B. B. | NTRS | 1984


    Rail lubrication: A solid future?

    Kramer, Jerome | IuD Bahn | 1994



    Lubrication by Components of Engine Exhaust — A New Concept of Solid Lubrication

    Lauer, James L. / Blanchet, Thierry A. | SAE Technical Papers | 1993