Under the sponsorship of the BMDO Russian Hall Electric Thruster Technology program two xenon hollow cathodes, a flight unit and a flight spare were fabricated, acceptance tested and delivered to the Naval Research Laboratory for use on the Electric Propulsion Demonstration Module. These hollow cathodes, based on the International Space Station plasma contactor design, were fabricated at the NASA Lewis Research Center for use with a D-55 anode layer thruster in the first on-orbit operational application of this technology. The 2.2 Ampere nominal emission current of this device was obtained with a xenon flow rate of 0.6 mg/s. Ignition of the cathode discharge was accomplished through preheating the active electron emitter with a resistive heating element before application of a 650 volt ignition pulse between the emitter and an external starting electrode. The successful acceptance testing of the Electric Propulsion Demonstration Module utilizing these cathodes demonstrated the suitability of cathodes based on barium impregnated inserts in an enclosed keeper configuration for use with Hall thruster propulsion systems.
RHETT/EPDM Flight Hollow Cathode
1997
8 pages
Report
Keine Angabe
Englisch
RHETT/EPDM Flight Hollow Cathode
NTRS | 1997
|RHETT/EPDM Performance Characterization
NTRS | 1998
|RHETT/EPDM Performance Characterization
NTIS | 1998
|Rhett Flater Aims High - AHS's executive director challenges the civil helicopter industry.
Online Contents | 2002
|The BMDO Russian Hall Electric Thruster Technology (RHETT) Program: From Laboratory to Orbit
British Library Conference Proceedings | 1997
|