Technology for simulating plumes in wind tunnel tests was not adequate to provide the required confidence in test data where plume induced aerodynamic effects might be significant. A broad research program was undertaken to correct the deficiency. Four tasks within the program are reported. Three of these tasks involve conducting experiments, related to three different aspects of the plume simulation problem: (1) base pressures; (2) lateral jet pressures; and (3) plume parameters. The fourth task involves collecting all of the base pressure test data generated during the program. Base pressures were measured on a classic cone ogive cylinder body as affected by the coaxial, high temperature exhaust plumes of a variety of solid propellant rockets. Valid data were obtained at supersonic freestream conditions but not at transonic. Pressure data related to lateral (separation) jets at M infinity = 4.5, for multiple clustered nozzles canted to the freestream and operating at high dynamic pressure ratios. All program goals were met although the model hardware was found to be large relative to the wind tunnel size so that operation was limited for some nozzle configurations.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Space Shuttle Plume Simulation Effect on Aerodynamics


    Beteiligte:
    Hair, L. M. (Autor:in)

    Erscheinungsdatum :

    01.10.1978


    Medientyp :

    Report


    Format :

    Keine Angabe


    Sprache :

    Englisch


    Schlagwörter :




    Space Shuttle Plume/Simulation Application

    W. Boyle / B. Conine / G. Bell | NTIS | 1979


    Space shuttle plume/simulation application

    Boyle, W. / Conine, B. / Bell, G. | NTRS | 1979


    Space Shuttle Technology - Aerodynamics

    Henderson, A., Jr. | NTRS | 1970