The Shuttle Remote Manipulator System, has a articulated arm of 50 ft. length with six motor-driven joints. The basic purpose is to establish physical contact with various space hardware items and maneuver these to the desired position and attitude with respect to the Orbiter, nulling out relative velocities and stabilizing the free-body system by managing residual energies. The normal operating mode is resolved-motion end-point rate control by man-in-loop command. The translational freedoms are defined so that the End Effector (EEFTR) of the arm will move in planes parallel to the principal translational planes of the Orbiter, at a rate commanded by the displacement of the Translation Hand Controller in the corresponding freedom and direction. The rotational freedoms are rate-controlled by the Rotation Hand Controller about pivot axes parallel to Orbiter roll, pitch and yaw, originating at the EEFTR reference point.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Multi-axis hand controller for the shuttle remote manipulator system


    Beteiligte:
    Lippay, A. L. (Autor:in)


    Erscheinungsdatum :

    01.01.1977


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch





    Low-Fatigue Hand Controller For Remote Manipulator

    Maclaren, Brice / Mcmurray, Gary / Lipkin, Harvey | NTRS | 1993


    Shuttle remote manipulator system hardware test facility

    Wagner-Bartak, C. G. / Middleton, J. A. / Hunter, J. A. | NTRS | 1980


    Evaluation of the Shuttle Remote Manipulator

    L. J. Everett / R. C. Redfield | NTIS | 1993


    Evaluation of the Shuttle remote manipulator

    Everett, Louis J. / Redfield, R. C. | NTRS | 1993