A three-dimensional, forward-swept sidewall-compression inlet has been tested in the Mach 4 Blowdown Facility at the NASA Langley Research Center to examine parameters that affect inlet starting, operability, and performance. The inlet was designed to simultaneously provide good starting and mass capture characteristics through the combination of forward-swept sidewalls and the aft placement of the downstream cowl. Parametrics examined included top surface compression, geometric contraction ratio, sidewall compression angle, boundary-layer thickness on the vehicle undersurface, and cowl position. To simulate combustion effects on inlet operation, the inlet was mechanically back pressured to determine maximum achievable combustor-to-inlet pressure ratio prior to inlet unstart. Inlet operability and performance are shown in terms of inlet starting (pulsed and self-starting) and unstarting characteristics, inlet static pressure distributions, combustor back pressure limits, mass capture, and flow uniformity.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Operating characteristics at Mach 4 of an inlet having forward-swept, sidewall-compression surfaces


    Beteiligte:

    Erscheinungsdatum :

    01.07.1992


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch





    The Effects of Bodyside Compression on Forward and Aft Swept Sidewall Compression Inlets at Mach 4

    Rodi, P. E. / Trexler, C. A. / American Institute of Aeronautics and Astronautics et al. | British Library Conference Proceedings | 1994




    Some aspects on the leading edge swept sidewall compression scramjet inlet

    Thiagarajan, V. / Panneerselvam, S. / Defence Research & Development Laboratory et al. | British Library Conference Proceedings | 2000