To investigate low-cost options for fabricating main combustion chambers, formed platelet liners are being developed. The savings in manufacturing time and cost associated with platelet liners are accompanied by promising thermal advantages, such as lower-wall temperatures and increased cycle life. A subscale liner was tested by NASA at Marshall Space Flight Center (MSFC) to demonstrate its thermal performance. Testing to date has provided chamber pressures up to 2524 psia, while a maximum chamber pressure of 2700 psia is planned. In general, the liner has remained in good condition and performed well, with only minor areas of localized roughening. Data from this subscale test program is being used to develop a full size chamber for testing on a Space Shuttle Main Engine at MSFC in 1994.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Subscale hot-fire testing of a formed platelet liner


    Beteiligte:

    Kongress:

    AIAA, SAE, ASME, and ASEE, Joint Propulsion Conference and Exhibit ; 1993 ; Monterey, CA, United States


    Erscheinungsdatum :

    01.06.1993


    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Keine Angabe


    Sprache :

    Englisch




    Subscale hot-fire testing of a formed platelet liner

    ELAM, SANDRA / HAYES, WILLIAM | AIAA | 1993


    A3 Subscale Rocket Hot Fire Testing

    Saunders, Grady / Yen, Joseph | AIAA | 2009


    A3 Subscale Rocket Hot Fire Testing

    Saunders, G. P. / Yen, J. | NTRS | 2009


    Formed platelet liner concept for regeneratively cooled chambers

    BURKHARDT, W. / TOBIN, S. / MUEGGENBURG, H. | AIAA | 1990


    ASRM subscale plume deflector testing

    DOUGLAS, III, FREDDIE / DAWSON, MICHAEL / ORLIN, PETER | AIAA | 1992