Abstract Ultra-high strain rate deformation (> $ 10^{4} $ $ s^{−1} $) is common in high speed manufacturing and impact engineering. However, a general constitutive model suitable for describing the material deformation at ultra-high strain rates is still unavailable. The purpose of this study is of two-folds. The first is to systematically evaluate the performances of four typical constitutive models, Johnson-Cook (J-C), Khan-Huang-Liang (KHL), Zerilli-Armstrong (Z-A), and Gao-Zhang (G-Z), in predicting the dynamic behaviors of materials. The second is to obtain an improved constitutive model to better describe the deformation of materials under ultra-high strain rates. To this end, high strain rate tests were carried out on different crystalline structures, i.e., BCC, FCC, and HCP over a wide range of strain rate from $ 10^{2} $ $ s^{−1} $ to 1.5 × $ 10^{4} $ $ s^{−1} $. It was found that before the critical strain rate, around $ 10^{4} $ $ s^{−1} $, all of the previous models can predict the flow stresses. When the strain rate passes a critical point, however, these models fail to predict the sudden upsurge of the flow stresses. The improved model developed in this paper, by considering the dislocation drag mechanism, can successfully characterize the dynamic behaviours of materials over the whole range of strain rates.
On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals
International Journal of Automotive Technology ; 20 , Suppl 1 ; 31-37
2019
Aufsatz (Zeitschrift)
Englisch
BKL: | 55.20$jStraßenfahrzeugtechnik / 55.20 Straßenfahrzeugtechnik |
On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals
Springer Verlag | 2019
|High Strain-Rate Constitutive Models for Solid Rocket Propellants
Online Contents | 2002
|A high strain rate constitutive model for high strength steels
Kraftfahrwesen | 2003
|A High Strain Rate Constitutive Model for High Strength Steels
SAE Technical Papers | 2003
|