Cavitation has been known to occur in injector nozzles. It is known that the mass flow rate from a nozzle and occurrence of cavitation in nozzle holes are dependent on injection pressure and back pressure together with the nozzle geometry and needle effects. Interestingly, injected mass from sharp inlet hole nozzles under these conditions is independent of back pressure for a range of pressures under cavitating flows (similar to choking). In the past, information on the change in the spray parameters and the Sauter mean diameter (SMD) for these varying isolated back pressures has not been available.In this study spray visualizations, SMD measurements and momentum estimates for sharp and rounded inlet nozzles were performed for a range of upstream and back pressures while keeping the ambient density constant. A Live Digital Light Extinction Technique (LDLET) was developed and applied as the optical technique for spray Sauter mean diameter measurements. Discharge coefficient estimates were obtained by direct measurements of nozzle sac pressures of a high-pressure common rail injection system using sharp and rounded inlet hole nozzles. Results were compared and classifications of spray mixing were proposed for the sharp and rounded inlet hole nozzles, which otherwise had the same nozzle geometry.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Isolated Effects of Ambient Pressure, Nozzle Cavitation and Hole Inlet Geometry on Diesel Injection Spray Characteristics


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    CEC/SAE Spring Fuels & Lubricants Meeting & Exposition ; 2000



    Erscheinungsdatum :

    19.06.2000




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Isolated Effects of Ambient Pressure, Nozzle Cavitation and Hole Inlet Geometry on Diesel Injection Spray Characteristics

    Goney, K. H. / Corradini, M. L. / Society of Automotive Engineers | British Library Conference Proceedings | 2000


    Isolated effects of ambient pressure, nozzle cavitation and hole inlet geometry on diesel injection spray characteristics

    Goney,K.H. / Corradini,M.L. / Univ.of Wisconsin-Madison,US | Kraftfahrwesen | 2000


    Effect of Injection Amount on Diesel Spray Characteristics of Multi-Hole Nozzle

    Ueki, Hironobu / Komada, Keisuke / Saito, Manabu | SAE Technical Papers | 2019


    Effect of Injection Amount on Diesel Spray Characteristics of Multi-Hole Nozzle

    Komada, Keisuke / Saito, Manabu / Ueki, Hironobu | British Library Conference Proceedings | 2019


    Effects of Nozzle Geometry and Ambient Pressure on the Characteristics of a Modulated Spray

    Wang, D. / Ganji, A. R. / Sipperley, C. M. et al. | British Library Conference Proceedings | 1999