Premixed Charge Compression Ignition (PCCI), a Low Temperature Combustion (LTC) strategy for diesel engines is of increasing interest due to its potential to simultaneously reduce soot and NOx emissions. However, the influence of mixture preparation on combustion phasing and heat release rate in LTC is not fully understood. In the present study, the influence of injection timing on mixture preparation, combustion and emissions in PCCI mode is investigated by experimental and computational methods. A sequential coupling approach of 3D CFD with a Stochastic Reactor Model (SRM) is used to simulate the PCCI engine. The SRM accounts for detailed chemical kinetics, convective heat transfer and turbulent micro-mixing. In this integrated approach, the temperature-equivalence ratio statistics obtained using KIVA 3V are mapped onto the stochastic particle ensemble used in the SRM. The coupling method proved to be advantageous in terms of computational expense and emission prediction capability, as compared with direct coupling of CFD and chemical kinetics. The results show that the fuel rich pockets in the late injection timing are desirable for triggering auto-ignition and advancing the combustion phasing. Furthermore, the model is utilised to study the impact of combustion chamber design (open bowl, vertical side wall bowl and re-entry bowl) on PCCI combustion and emissions. The piston bowl geometry was observed to influence the in-cylinder mixing and the pollutant formation for the conditions studied.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Influence of Injection Timing and Piston Bowl Geometry on PCCI Combustion and Emissions


    Weitere Titelangaben:

    Sae Int. J. Engines


    Beteiligte:
    Bhave, Amit (Autor:in) / Dris, Antonis (Autor:in) / Su, Haiyun (Autor:in) / Cao, Li (Autor:in) / Kraft, Markus (Autor:in) / McDavid, Robert M. (Autor:in) / Mosbach, Sebastian (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2009


    Erschienen in:

    Erscheinungsdatum :

    20.04.2009


    Format / Umfang :

    15 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch







    Effects of Injection Pressure, Timing and EGR on Combustion and Emissions Characteristics of Diesel PCCI Engine

    Tomita, Eiji / Kawahara, Nobuyuki / Kiplimo, Robert et al. | SAE Technical Papers | 2011


    Effects of Injection Pressure, Timing and EGR on Combustion and Emissions Characteristics of Diesel PCCI Engine

    Kiplimo, R. / Tomita, E. / Kawahara, N. et al. | British Library Conference Proceedings | 2011