Different types and sizes of hydraulic drum brake designs viz., two leading sliding shoe, leading-trailing sliding shoe, floating abutment sliding shoe are in existence today catering to the increasing vehicle weight applications. On an end requirement basis and by the cost benefit ratio, either of the above designs with appropriate brake size (diameter) is selected for a given vehicle application. Increasing wheel cylinder size and brake size proportional to the requirement also needs bigger actuation systems and poses packaging constraints within the available wheel sizes.A High performance drum brake assembly is developed from the basic hydraulic, leading-trailing, sliding shoe brake design, which can substantially increase the brake output torque for a given hydraulic input pressure or reduce the required pipeline pressure to realize the current rated torque. The brake assembly has a new lever pivoted on the leading shoe web with one end resting on the wheel cylinder piston and the other end on the strut assembly. This lever touches the piston instead of the leading shoe web and receives input from the pressurized wheel cylinder.Upon actuating the wheel cylinder assembly, the lever rotates about its pivot point and pushes the strut assembly. The trailing shoe now receives two inputs viz., one from the wheel cylinder and the other from the strut assembly, which is mechanically actuated by the new lever. The reaction from the trailing shoe is passed via the strut assembly as an input to the leading shoe. The wheel cylinder input and the strut reaction force together acting on the pivot, results in almost twice the force acting on the leading shoe. Prototype samples incorporating the new design is developed and validated on inertia dynamometer.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    High Performance Drum Brake Assembly for Automotive Braking Applications


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    21st Annual Brake Colloquium & Exhibition ; 2003



    Erscheinungsdatum :

    19.10.2003




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    High performance drum brake assembly for automotive braking applications

    Raajha,M.P. / Narayanan,V.L. / Brakes India,IN | Kraftfahrwesen | 2003


    High Performance Drum Brake Assembly for Automotive Braking Applications

    Raajha, M. P. / Narayanan, V. L. / Society of Automotive Engineers | British Library Conference Proceedings | 2003


    AUXILIARY BRAKE ASSEMBLY, HOIST, AND CABLE DRUM BRAKING METHOD

    BEJAN MAGHSOODI | Europäisches Patentamt | 2023

    Freier Zugriff

    AUXILIARY BRAKE ASSEMBLY, HOIST, AND CABLE DRUM BRAKING METHOD

    BEJAN MAGHSOODI | Europäisches Patentamt | 2021

    Freier Zugriff

    Parking braking device for drum brake

    MO QIUXIAN / LI CHEN / YE FEI et al. | Europäisches Patentamt | 2022

    Freier Zugriff