The present paper aims to present the CFD simulation of the under hood flow for Forklift Truck of 12 ton capacity. The purpose of the forklift truck is to handle the containers on marine ports. The speed of forklift truck is limited to 22km/hr. The engine selected is of 133HP @ 2300rpm.The main objective of this investigation is to evaluate the air flow assessment in the under hood compartment and to determine velocity distribution in the under hood region that will affect the cooling system performance. As Radiator, Charge Air cooler and Fan are tested at free inlet and free outlet (FIFO) conditions at supplier end these components behaves differently when assembled in vehicles. This CFD simulations will help to determine the effect on cooling performance in assembled conditions. Also recirculation zone in under hood compartment is identified which has adverse effect on engine cooling performance like reduction in cooling flow rate. The motion of the fan has been model using MRF approach (Multiple Reference Frame method), Radiator and CAC has been modeled using distributed resistance (porous media) flow concept based on experimental test data of Radiator. The standard' k − ε model has been employed to model the turbulence.Another important parameter which has effect on cooling performance is Fan immersion in shroud. Fan immersion is length of projection of fan in shroud assembly. In this paper different length of fan immersion is simulated and found out that less fan immersion is favorable to cooling system performance as compared to more fan immersion in shroud. Fan immersion is critical installation parameter as it has significance effect on performance of cooling system.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    CFD Simulation of Under Hood Engine Compartment for Forklift Truck


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    8th SAEINDIA International Mobility Conference & Exposition and Commercial Vehicle Engineering Congress 2013 (SIMCOMVEC) ; 2013



    Erscheinungsdatum :

    27.11.2013




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    CFD Simulation of Under Hood Engine Compartment for Forklift Truck

    Dangmali, V. / Dhamangaonkar, P.R. / Atnurkar, A. et al. | British Library Conference Proceedings | 2013


    CABIN AND HOOD TILTING DEVICE OF FORKLIFT TRUCK

    RYU YONG SEOK | Europäisches Patentamt | 2017

    Freier Zugriff

    CABIN AND HOOD TILTING DEVICE OF FORKLIFT TRUCK

    Europäisches Patentamt | 2022

    Freier Zugriff

    Forklift hood

    LI ZHICHUN | Europäisches Patentamt | 2015

    Freier Zugriff

    Forklift hood

    SUN CHENGBIN | Europäisches Patentamt | 2015

    Freier Zugriff