It is becoming an increasingly important issue to improve NVH performance of electric drive motor for electric vehicle as the market grows rapidly. The correlation between stiffness of rear cover of motor, rotor eccentricity and noise of an electric drive is discussed in this paper which was few mentioned before. Poor stiffness of bearing chamber of rear cover may cause rotor eccentricity, which would lead to additional orders of electromagnetic noise. Stiffness optimization model of rear cover of motor was established, and the Optistruct of Hyper works software was used to improve stiffness as well as mode frequency by designing circular and radial ribs to surround bearing chamber of rear cover under guidance of topology. As compared to basis model with same mass, the 1st and 2nd strict mode frequencies of optimized rear cover separately increased by 11% and 12.5% with numerical simulations. While average dynamic stiffness in x and z direction respectively increased by 14.3% and 11.2%, and static stiffness of bearing chamber of optimized rear cover in +x and -z directions increased by 41.98% and 38.9%. Besides, compared results of NVH experiments in vehicle with two prototypes showed that optimized rear cover could reduce vibration on itself and assembly, and significantly reduce the 3rd, 4th, and 5th motor noise in front compartment, as well as in passenger cabin. As showed in the order slices of noise color map in front compartment, the amplitude of 3rd, 4th, and 5th orders of noise reduced about 5dB~10dB.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Topology Optimization of Rear Cover in EV Motor and Noise Attenuation


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Ma, Tiancai (Autor:in) / Lu, Xinxi (Autor:in) / Zhang, Youguo (Autor:in) / Lin, Zheng (Autor:in)

    Kongress:

    Vehicle Electrification and Powertrain Diversification Technology Forum Part II ; 2021



    Erscheinungsdatum :

    14.02.2022




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Topology Optimization of Rear Cover in EV Motor and Noise Attenuation

    Zhang, Youguo / Lu, Xinxi / Ma, Tiancai et al. | British Library Conference Proceedings | 2022


    Topology Optimization of Rear Cover in EV Motor and Noise Attenuation

    Zhang, Youguo / Lu, Xinxi / Lin, Zheng et al. | British Library Conference Proceedings | 2022


    Topology Optimization of Rear Cover in EV Motor and Noise Attenuation

    Zhang, Youguo / Lu, Xinxi / Lin, Zheng et al. | British Library Conference Proceedings | 2022


    Rear cover for a motor scooter

    Europäisches Patentamt | 2018

    Freier Zugriff

    Motor Vehicle Rear

    EBERLE WILFRIED / KLAMSER HERBERT / WIERSCHEM FRANZ-RUDOLF et al. | Europäisches Patentamt | 2015

    Freier Zugriff