This paper reports the analytical procedure developed for a simulation of knee impact during a barrier crash using a hybrid III dummy lower torso. A finite element model of the instrument panel was generated. The dummy was seated in mid-seat position and was imparted an initial velocity so that the knee velocity at impact corresponded to the secondary impact velocity during a barrier crash. The procedure provided a reasonably accurate simulation of the dummy kinematics. This simulation can be used for understanding the knee bolster energy management system. The methodology developed has been used to simulate impact on knee for an occupant belted or unbelted in a frontal crash. The influence of the vehicle interior on both the dummy kinematics and the impact locations was incorporated into the model. No assumptions have been made for the knee impact locations, eliminating the need to assume knee velocity vectors. This procedure can also be used to obtain Tibia loading and ankle behavior (twist).The results obtained from the simulation compared favorably with the barrier test data. With different initial velocity applied to the dummy, the procedure has been adapted to simulate sled tests. The procedure has been successfully used for the design and development of the instrument panel to meet Federal Motor Vehicle Safety Standard (FMVSS) 208 requirements.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Crash Simulation of Instrument Panel Knee Bolster Using Hybrid III Dummy Lower Torso


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Bapu, G. (Autor:in) / Erasala, S. (Autor:in) / Humayun, S. (Autor:in)

    Kongress:

    International Congress & Exposition ; 1995



    Erscheinungsdatum :

    01.02.1995




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    A crash simulation of instrument panel knee bolster using hybrid III dummy lower torso

    Hyumayun,S. / Bapu,G / Erasala,S. et al. | Kraftfahrwesen | 1995


    A Crash Simulation of Instrument Panel Knee Bolster Using Hybrid III Dummy Lower Torso

    Humayun, S. / Bapu, G. / Erasala, S. et al. | British Library Conference Proceedings | 1995


    Modeling the lower torso of hybrid III dummy

    Liu,D. / Gupta,B. / Lu,D.X. et al. | Kraftfahrwesen | 1997


    Modeling the Lower Torso of Hybrid III Dummy

    Liu, D. / Gupta, B. / Lu, D. X. et al. | British Library Conference Proceedings | 1997


    Modeling the Lower Torso of Hybrid III Dummy

    Gupta, Bharat / Liu, Dahsin / Lu, David X. | SAE Technical Papers | 1997