Current SAE practices for evaluating potential improvements in fuel economy on heavy-duty vehicles rely on gravimetric measurements of fuel tanks. However, the recent evolution of portable emissions measurement systems (PEMS) offers an alternative means of evaluating real-world fuel economy that may be faster and more cost effective. This paper provides a direct comparison of these two methods based on a recent EPA study conducted at Southwest Research Institute. More than 228 on-road tests were performed on two pairs of class 8 tractor-trailers according to SAE test procedure J1321 in an assessment of various chassis components designed to reduce drag losses on the vehicle. During these tests, SEMTECH-D™ portable emissions measurement systems from Sensor's, Incorporated were operating in each of the vehicles to evaluate emissions and to provide a redundant measure of fuel economy. These measurements showed excellent correlation to the gravimetric results with a coefficient of determination greater than 0.98 and nearly identical regression slopes for three of the four trucks. One truck had a series of suspect data toward the end of the study that biased the regression slope higher by 4%. Measurement variability also compared favorably between the two test methods. The average coefficient of variation based on the three repeat laps performed on every test segment was 2.98% for the gravimetric measurements and 3.26% for the SEMTECH-D measurements at a 95% confidence interval. These results all support the use of SEMTECH-D as a viable alternative to the gravimetric measurements for heavy-duty in-use fuel economy determination.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluating Real-World Fuel Economy on Heavy Duty Vehicles using a Portable Emissions Measurement System


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Erb, Anthony (Autor:in) / Ensfield, Carl (Autor:in) / Bynum, Cheryl (Autor:in) / Bachman, L. Joseph (Autor:in)

    Kongress:

    SAE 2006 Commercial Vehicle Engineering Congress & Exhibition ; 2006



    Erscheinungsdatum :

    31.10.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Real-world testing of heavy duty vehicles for emissions and fuel economy

    Eastlake,A.R. / Millbrook Proving Ground,GB | Kraftfahrwesen | 1997



    Real-world testing of heavy duty vehicles for emissions and fuel economy

    Eastlake, A. R. / Institution of Mechanical Engineers; Automotive Division / Institution of Electrical Engineers | British Library Conference Proceedings | 1997


    Real-World Emissions of Euro VI Heavy-Duty Vehicles

    Bosteels, Dirk / Demuynck, Joachim / Ligterink, Norbert et al. | SAE Technical Papers | 2021