Continued legislative pressure to reduce diesel emissions has resulted in the development of engines with advanced fuel injection equipment (FIE). These injection systems produce temperatures and pressures at the injector tips that are considerably higher than those seen in previous technologies. This environment is initiating deposit formation at and around the injector tip which is leading to significant power loss and increased smoke generation.Investigations have been carried out to understand this phenomenon. Cyclic bench engine testing has generated high levels of deposits when minimal amounts of a fuel soluble zinc salt are doped into clear fuels. The deposits are found both in and around the nozzle tips. Analysis of the deposit shows the presence of zinc. These deposits are proving to be more challenging than those previously seen with older FIE technology. Detergents that have historically been effective in resolving injector deposits are proving less effective.Investigations to understand possible sources of metal contamination focused first on laboratory tests followed by vehicle trials. Laboratory testing carried out on different fuels and different additive types showed that certain lubricity agents promote the uptake of metals into fuel. Alternative, safe lubricity additive options are available to restore appropriate lubricity to diesel fuel without impacting metal uptake and hence the generation of injector deposits. A field trial using several vehicles has reproduced the findings of the laboratory tests. The field testing has confirmed that low, but significant levels of metals are solubilised into fuel from the tank and the FIE in the presence of a specific lubricity additive technology, whilst other lubricity additives are neutral. The level of metal pick up in the field is comparable with that used in the bench engine testing to generate injector deposits.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Impact of Fuel Additives on Diesel Injector Deposits


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Leedham, Angela (Autor:in) / Graupner, Olaf (Autor:in) / Caprotti, Rinaldo (Autor:in) / Klaua, Thomas (Autor:in)

    Kongress:

    2004 Powertrain & Fluid Systems Conference & Exhibition ; 2004



    Erscheinungsdatum :

    25.10.2004




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Impact of fuel additives in diesel injector deposits

    Leedham,A. / Caprotti,R. / Graupner,O. et al. | Kraftfahrwesen | 2004


    Fuel quality and diesel injector deposits

    Lacey,P. / Gail,S. / Kientz,J.M. et al. | Kraftfahrwesen | 2012


    Fuel Quality and Diesel Injector Deposits

    Daveau, Christian / Benoist, Geoffroy / Kientz, Jean Marc et al. | SAE Technical Papers | 2012


    Effect of Diesel Fuel Composition and Additives on the Buildup of Injector Deposits

    Virk, Kashmir / Herbstman, Sheldon | SAE Technical Papers | 1989


    The nature and cause of internal diesel injector deposits and the effectiveness of fuel additives

    Banning,M. / Barker,J. / Mulqueen,S. et al. | Kraftfahrwesen | 2016