In the automotive industry, the use of beading is widely spread. Beads are primarily used to stiffen the floor and dash panels. The aim is to reduce vibration levels and hopefully at the same time reduce radiated noise. Beading has a positive effect close to the first panel mode's natural frequency however it can have a negative effect at all other frequencies. Typically, engineers assume a radiation efficiency of “1” (one) over the whole frequency range for simplicity or lack of available implemented formulation in their simulation tools. This assumption directs the investigation at reducing the vibration levels only. This approach can be misleading because even though radiation efficiency tends to “1” (one) above coincident frequency it is not the case below coincidence. While increasing stiffness reduces vibration levels, it also increases radiation efficiency. This can yield to higher levels of radiated noise.This paper presents a comparison between panels with uniform cross-section and beaded panels in two different configurations: i) Academic frame and plate case and ii) Automotive floor. Vibration levels, radiation efficiency and sound radiated power are presented for all cases. Different types of beadings are compared and conclusions are drawn as to whether these beadings really reduce radiated noise.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Beading on Radiated Noise


    Weitere Titelangaben:

    Sae International Journal of Passenger Cars. Mechanical Systems
    Sae Int. J. Passeng. Cars – Mech. Syst


    Beteiligte:
    Caillet, Arnaud (Autor:in) / Blanchet, Denis (Autor:in) / Van Hal, Willem (Autor:in)

    Kongress:

    6th International Styrian Noise, Vibration & Harshness Congress - Sustainable NVH solutions inspired by ecology and economy ; 2010



    Erscheinungsdatum :

    09.06.2010


    Format / Umfang :

    7 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    BEADING AND VEHICLE INTERIOR ARTICLE INCLUDING BEADING

    MURAYAMA YOKO / TAKESHITA KAZUTO / GOTO SHOZO et al. | Europäisches Patentamt | 2017

    Freier Zugriff

    BEADING

    YASUE TAKASHI | Europäisches Patentamt | 2020

    Freier Zugriff

    BEADING AND VEHICLE INTERIOR ARTICLE INCLUDING BEADING

    MURAYAMA YOKO / TAKESHITA KAZUTO / GOTO SHOZO et al. | Europäisches Patentamt | 2017

    Freier Zugriff

    LAMINATED GLAZING COMPRISING PROFILED CLIP IN BEADING

    DE PAOLI MARTIAL / LAMOUREUX LAURENT / ARTZNER EMMANUELLE et al. | Europäisches Patentamt | 2018

    Freier Zugriff

    De-beading device for tire-changing machines

    FERRARI GINO / MAIOLI FRANCO | Europäisches Patentamt | 2018

    Freier Zugriff