In order to increase the air charge of crankcase-scavenged two-stroke cycle engines, the relations between delivery ratio and engine speed were investigated on a rotary disc-valve inlet port engine and on a conventional piston-valve inlet port engine by varying through wide limits the angle area and timing of the inlet port.For the inlet port configuration tested on the first engine, it was found that there was an optimum cut angle of the rotary disc valve, which produced a certain angle area. To improve the delivery ratio characteristics at a given speed, it was not necessary to change this angle area; it was effective to change only the timing of the inlet port by shifting the disc valve around the crankshaft.For the piston-valve inlet port engine, the results showed that a wide, low port, which was also found to have a higher flow coefficient, produced a higher delivery ratio over the entire engine speed range than a narrow, high port. For the configuration tested (with no inlet or exhaust pipes), the maximum delivery ratio of the wide, low port was nearly in proportion to the effective crankcase stroke.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Study of the Delivery Ratio Characteristics of Crankcase-Scavenged Two-Stroke Cycle Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    1969 International Automotive Engineering Congress and Exposition ; 1969



    Erscheinungsdatum :

    01.01.1969




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Study of delivery ratio characteristics of crankcase-scavenged two-stroke cycle engines

    Komotori, K. / Watanabe, E. | Engineering Index Backfile | 1969



    Limiting delivery ratio curves of crankcase-scavenged 2-stroke cycle engines by throttling the inlet port

    Fukutani,I. / Watanabe,E. / Inst.of Vocational Training,Div.of Mechanical and Transportation Engng.,JP | Kraftfahrwesen | 1986


    Initial Heavy Fuel Development of Stepped Piston and Crankcase Scavenged Two-Cycle Engines

    Hooper, B. / Hooper, P. / Royal Aeronautical Society | British Library Conference Proceedings | 1996


    CFD Prediction of Crankcase Flow Regimes in a Crankcase Scavenged Two-Stroke Engine

    Cunningham, G. / Boyall, J. / Kee, R. J. | SAE Technical Papers | 1997