One-dimensional unsteady gas dynamics dominate the prediction and optimization of two-stroke engine performance. Its application in engines with complicated geometry is, however, limited because the flow through the engine is three dimensional in nature. Multidimensional CFD has the capacity to capture the effect of complicated flow fields. However, most existing CFD studies include either only one cylinder with a partial exhaust system or just a separate exhaust manifold, and boundary conditions need to be fed from experimental data. It is found in this study that such simplifications may yield misleading results. In a previous study, the authors extended a multidimensional CFD code, KIVA to simulate a multi-cylinder engine together with a full exhaust manifold. The need for exhaust pressure boundary conditions was thus eliminated. In continuation of this study, a crankcase model was first developed to dynamically predict the crankcase pressure. A reed valve model proposed by Blair, et al. was used to predict the flow into the crankcase through the reed valve. Thus the code is capable of predicting engine performance without any input of dynamic boundary conditions. The developed code was first rigorously tested against a single cylinder engine at a wide range of engine speeds. The computed exhaust pressure trace agrees well with the measurement. It shows that the predicted trapped oxygen mass is a good indicator of engine power. The test was then extended to a twin-cylinder loop scavenged engine with a folded exhaust manifold. The predicted exhaust pressure matches experiments, and the predicted trapped oxygen mass agrees well with the estimate based on the measured fuel consumption and emission data. The code was finally used to optimize a production two-stroke engine, and the improvement predicted by the simulation was realized in dynamometer tests.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Predicting and Optimizing Two-Stroke Engine Performance Using Multidimensional CFD


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Lucier, Peter (Autor:in) / Strauss, Sebastian (Autor:in) / Craft, Todd (Autor:in) / Zeng, Yangbing (Autor:in)

    Kongress:

    Small Engine Technology Conference & Exposition ; 2004



    Erscheinungsdatum :

    27.09.2004




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Predicting and Optimizing Tw-Stroke Engine Performance Using Multidirectional CFD

    Zeng, Y. / Strauss, S. / Lucier, P. et al. | British Library Conference Proceedings | 2004


    Multidimensional Cycle Analysis on a Novel 2-Stroke HSDI Diesel Engine

    Mattarelli, E. / Fontanesi, S. / Malaguti, S. et al. | SAE Technical Papers | 2007


    Multidimensional Cycle Analysis on a Novel 2-Stroke HSDI Diesel Engine

    Mattarelli, E. / Fontanesi, S. / Gagliardi, V. et al. | British Library Conference Proceedings | 2007


    Multidimensional cycle analysis on a novel 2-stroke HSDI diesel engine

    Mattarelli,E. / Fontanesi,S. / Gagliardi,V. et al. | Kraftfahrwesen | 2007


    Multidimensional calculation of combustion in a loop-scavenged two-stroke cycle engine

    Ahmadi-Bfrui,B. / Kratochwill,H. / AVL List,Graz,AT | Kraftfahrwesen | 1990