The primary goal of closure design is to achieve a functional, lightweight assembly, while also meeting stiffness, crash, and dent resistance targets. Typical automotive closure assemblies, such as liftgates, decklids, hoods, and doors, usually consist of an inner panel, outer panel, and miscellaneous reinforcements. There are also many attachment methods used; hem flange, spot-weld, laser weld, adhesive, hinges, latches, struts, and bolts. This paper investigates the weight reduction benefits gained from utilizing structural foam to increase stiffness performance. Finite element analysis (FEA) is applied to baseline and redesigned versions of a liftgate, door, and decklid assembly to measure the stiffness performance with structural foam application. Performance is measured in terms of maximum displacement and Von Mises stresses incurred from several loading conditions. The conclusions will show that through slight redesign and structural foam application, lighter closure assemblies can often be achieved with equivalent stiffness performance. Furthermore, cost analyses will show that this can be done at little or no cost increase, depending on the type of closure assembly.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Lightweight Closure Assemblies Utilizing Structural Foam


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2004 World Congress & Exhibition ; 2004



    Erscheinungsdatum :

    08.03.2004




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Lightweight closure assemblies utilizing structural foam

    McKune,P.M. / United States Steel,US | Kraftfahrwesen | 2004


    Lightweight Closure Assemblies Utilizing Structural Foam

    McKune, P. M. / Society of Automotive Engineers | British Library Conference Proceedings | 2004


    2004-01-1514 Lightweight Closure Assemblies Utilizing Structural Foam

    McKune, P. M. / Society of Automotive Engineers | British Library Conference Proceedings | 2004


    Foam rigidized inflatable structural assemblies

    Tinker, Michael L. / Schnell, Andrew R. | NTRS | 2010


    Achieving Lightweight Flexible Rear Seat Systems Utilizing Expanded Polypropylene Foam

    Shioya, S. / Gillette, T. / Yokoyama, M. et al. | British Library Conference Proceedings | 2007