Numerous studies have validated EDSMAC4 as an effective method of reconstructing automobile collisions; however, little has been done to investigate the effect of varying stiffness coefficients on the results of accident reconstruction and simulation analyses. When comparing simulations to staged collisions, the stiffness coefficients are frequently well defined; however, this is not always the case in real world accidents. Six vehicle-to-vehicle test impacts were modeled using EDSMAC4. Stiffness coefficients for the vehicles were obtained from test data of exemplar vehicles. After modeling the impacts with the base stiffness level, the stiffness coefficients were modified for both vehicles either plus (+) or minus (−) 25%. The impacts were re-run and the predicted vehicle damage (maximum crush and pattern), impact severity (Delta-V), peak acceleration, impact duration, post impact trajectory, and impact force was compared. The results indicate that, depending on the impact configuration, a ±25% change in stiffness coefficient may result in a significant change in the predicted peak acceleration, peak force, maximum crush, and post-impact travel. However, Delta-V was found to be very robust with regard to variation in stiffness coefficients. These findings indicate the importance of understanding the sensitivity of each output parameter when interpreting simulation model results.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Effect of Stiffness Coefficients on Output Variables in EDSMAC4 Simulations


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Richards, Darrin (Autor:in) / Kuzel, Michael (Autor:in) / Werner, Stephen (Autor:in)

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    03.04.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    The effect of stiffness coefficients on output variables in EDSMAC4 simulations

    Kuzel,M. / Werner,S. / Richards,D. et al. | Kraftfahrwesen | 2006


    2006-01-1396 The Effect of Stiffness Coefficients on Output Variables in EDSMAC4 Simulations

    Kuzel, M. / Werner, S. / Richards, D. et al. | British Library Conference Proceedings | 2006


    Stiffness Coefficients of Heavy Commercial Vehicles

    Cipriani, Alfred / Cornetto, Anthony / Bayan, Fawzi P. et al. | SAE Technical Papers | 2013


    Stiffness Coefficients of Heavy Commercial Vehicles

    Poirette, N. / Bayan, F.P. / Suway, J. et al. | British Library Conference Proceedings | 2013


    Calculating Non-Linear Frontal Stiffness Coefficients

    Gilbert, Brian / McCarthy, Joseph / Jadischke, Ron | SAE Technical Papers | 2014