The formed-in-place gasket concept consists of using a paste-type liquid silicone RTV (room temperature vulcanizing rubber) applied to the flange area of the components to be sealed and having the flanges squeeze out and form the liquid gasket on assembly. This system offers several advantages over the conventional precut or preformed gaskets. This system can replace all the static gaskets on a drive train (except head and manifold) and perform as well or better than the gaskets it replaces. Material cost can be reduced as can handling costs when the RTV is automatically applied.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Formed-in-Place RTV Silicone Gaskets


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Maudlin, M. A. (Autor:in)

    Kongress:

    1972 Automotive Engineering Congress and Exposition ; 1972



    Erscheinungsdatum :

    01.02.1972




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    RTV silicone rubber formed-in-place gaskets

    Clark,W.H. / Dow Corning,Midland,US | Kraftfahrwesen | 1979


    RTV Silicone Rubber Formed-In-Place Gaskets

    Clark, William H. | SAE Technical Papers | 1979


    Designing Cured-in-Place Silicone Rubber Engine Gaskets

    Roberts, Kyle T. | SAE Technical Papers | 1990


    Designing cured-in-place silicone rubber engine gaskets

    Roberts,K.T. / Dow Corning,US | Kraftfahrwesen | 1990


    DESIGN GUIDE FOR FORMED-IN-PLACE GASKETS

    SAE Technical Papers | 1988