Southwest Research Institute, as part of the Clean Diesel IV consortium, built a multi-cylinder HCCI engine that ran in the HCCI combustion mode full-time. The engine was used to develop HCCI fuels, demonstrate the potential operating range of HCCI, and to demonstrate the feasibility of transient control of HCCI. As part of the engine design, a hardware based method of decoupling control of air and EGR was developed and patented [ 1 ]. The system utilized a positive displacement supercharger with a controlled bypass valve for air-flow control, and a high-pressure loop EGR system with variable geometry turbocharger to control the EGR rate. By utilizing the system, the required precision from the air and EGR control in the engine controller was reduced. The results of the testing showed that with relatively simple actuator controllers, the engine could be transiently driven through the full calibrated range of engine speed and load, which was up to 11 bar BMEP and 2000 RPM, while effectively controlling combustion timing within three crank angle degrees (CAD) of the target
Development of a Transient-Capable Multi-Cylinder HCCI Engine
Sae Technical Papers
SAE 2010 World Congress & Exhibition ; 2010
12.04.2010
Aufsatz (Konferenz)
Englisch
Transient Control of a Multi Cylinder HCCI Engine During a Drive Cycle
SAE Technical Papers | 2005
|Transient control of a multi cylinder HCCI engine during a drive cycle
Kraftfahrwesen | 2005
|Balancing Cylinder-to-Cylinder Variations in a Multi-Cylinder VCR-HCCI Engine
SAE Technical Papers | 2004
|Balancing cylinder-to-cylinder variations on a multi-cylinder VCR-HCCI engine
Kraftfahrwesen | 2004
|Supercharging HCCI to Extend the Operating Range in a Multi-Cylinder VCR-HCCI Engine
SAE Technical Papers | 2003
|