Tailor welded blanks offer an excellent opportunity to reduce manufacturing costs, decrease vehicle weight, and improve the quality of sheet metal stampings. However, tearing near the weld seam is a concern in Tailor Welded Blanks due to material changes in the fusion and heat affected zones of the weld. Therefore, data is required such as the potential strain of the material in these areas to use in the process design. For example, Cao and Kinsey proposed a modification to the deep drawing process where segmented dies with local adaptive controllers clamp adjacent to the weld line during the forming operation thereby reducing the strain in the material near the weld seam and in turn the concern of tearing failure. In order to aid in the design process for this modification, an understanding of the effects of the welding process on material changes near the weld seam is essential. In this paper, Limit Dome Height data for aluminum 5182-H00 is presented to provide the potential principle strain in the material as well as initial experimental implementation results of the proposed process modification on a non-symmetric test panel verifying the potential strain results from the Limit Dome Height tests.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Forming of Aluminum Tailor Welded Blanks


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Kinsey, Brad (Autor:in) / Cao, Jian (Autor:in) / Viswanathan, Vikram (Autor:in)

    Kongress:

    SAE 2001 World Congress ; 2001



    Erscheinungsdatum :

    05.03.2001




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Forming of Tailor-Welded Aluminum Blanks

    Stasik, M. C. / Wagoner, R. H. / TMS; Structural Materials Division; Non-Ferrous Metals Committee | British Library Conference Proceedings | 1996


    Forming of aluminum tailor welded blanks

    Kinsey,B. / Viswanathan,V. / Cao,J. et al. | Kraftfahrwesen | 2001


    Aluminum tailor welded blanks

    Das, S. | Tema Archiv | 2000


    Manufacturing And Forming Of Aluminum Tailor Welded Blanks

    Saran, M. / Pickering, E. / Glagola, M. et al. | British Library Conference Proceedings | 1995


    Formability of Aluminum Tailor-Welded Blanks

    Sherman, Andrew M. / Kridli, Ghassan T. / Friedman, Peter A. | SAE Technical Papers | 2000