The static and impact load-carrying capability of resistance spot-welded HSLA and low carbon steel joints as influenced by loading rates, loading modes and welding schedules are presented. Peak load data at five testing speeds spanning between 1.6 × 10−4 km/h (10−4 mph) and 24 km/h (15 mph) for bare (1.5 mm; 0.060” gage) and galvanized (1.4 mm; 0.055” gage), 414 MPa (60 ksi)-yield HSLA steel and bare (1.3 mm; 0.050” gage) and galvanized (1.3 mm; 0.050” gage) low carbon steel showed an increase in maximum load with increasing test velocity. The tensile shear configuration exhibited the highest failure loads of the three joints tested, followed by the cross tension and coach peel joints. Results from under-, nominal-, and over-welded specimens suggested that slight over-welding in the expulsion region of the weld lobe could produce welds with similar, if not higher, loads as nominally-welded joints, whereas under-welding generally reduced the weld load-carrying capability.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Static and Impact Strengths of Spot-Welded HSLA and Low Carbon Steel Joints


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE International Congress and Exposition ; 1982



    Erscheinungsdatum :

    01.02.1982




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Static and Impact Strengths of Spot-Welded HSLA and Low Carbon Steel Joints

    Ewing,K.W. / Cheresh,M. / Thompson,R. et al. | Kraftfahrwesen | 1982


    Fatigue strength of spot welded joints in a HSLA steel

    Orts,D.H. / Armco,US | Kraftfahrwesen | 1981


    Fatigue Strength of Spot Welded Joints in a HSLA Steel

    Orts, D. H. | SAE Technical Papers | 1981


    Torsional Impact Strength of Spot-welded Joints

    Takagi, J. / Amago, T. / Koyanagi, K. et al. | British Library Conference Proceedings | 2011


    Microstructural and mechanical characterization of flash-welded joints is HSLA steels

    Versuto, Bruno Cassio Bertoco / Baptista, Carlos Antonio Reis Pereira / Ribeiro, Henrique Varella | SAE Technical Papers | 2010