Diesel engine in-cylinder combustion processes have been studied using computational models with particular attention to spray development, vaporization, fuel/air mixture formation and combustion. A thermodynamic zero-dimensional cycle analysis program was used to determine initial conditions for the multidimensional calculations. A modified version of the time-dependent, three-dimensional computational fluid dynamics code KIVA-II was used for the computations, with a detailed treatment for the spray calculations and a simplified model for combustion. The calculations were used to obtain an understanding of the potential predictive capabilities of the models. It was found that there is a strong sensitivity of the results to numerical grid resolution. With proper grid resolution, the calculations were found to reproduce experimental data for non- vaporizing and vaporizing sprays. However, for vaporizing sprays with combustion, extremely fine grids are needed. Computations made with the coarse grid sizes that are typically used underpredict measured gas phase (vapor) penetration results substantially. This underprediction of spray penetration reduces the accuracy of combustion predictions greatly. A study was made of factors that cause the observed sensitivity of the results to the computational grid size. The spray drop size and the fuel vaporization rate were found to be key parameters. Models for the processes that influence these parameters such as atomization, vapor diffusion and condensation processes are discussed.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Modeling Diesel Engine Spray Vaporization and Combustion


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Congress & Exposition ; 1992



    Erscheinungsdatum :

    01.02.1992




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Modeling diesel engine spray vaporization and combustion

    Gonzalez,M.A. / Lian,Z.W. / Reitz,R.D. et al. | Kraftfahrwesen | 1992


    Numerical Modeling of Diesel Spray Vaporization

    Klingsporn, M. / Renz, U. / ENEA; Agency: Italy | British Library Conference Proceedings | 1994


    Numerical modelling of diesel spray vaporization

    Klingsporn,M. / Renz,U. / RWTH Aachen,Lehrstuhl f.Waermeuebertragung und Klimatechnik,DE | Kraftfahrwesen | 1994


    Droplet vaporization model for spray combustion calculations

    ABRAMZON, B. / SIRIGNANO, W. | AIAA | 1988


    Spray penetration, vaporization and mixing in diesel engines

    Carpenter,M.H. / Ramos,J.I. / NASA,Langley Res.Center,Hampton,US et al. | Kraftfahrwesen | 1987