The front end structure is an important role in protecting the vehicle and passengers from harm during the collision. Increasing its protective capacity can be achieved by increasing the thickness or replacing high-strength materials. Most of the current research is analyzed separately from these two aspects. This paper proposes a multi-objective optimization method based on weighting factor analysis, which combines material and thickness selection. Firstly, the optimized components are determined based on the 100% frontal collision simulation results. Secondly, six thicknesses and two materials of the front part of the vehicle body are selected as design variables to construct an orthogonal test design. In this paper, a weight-based multi-factor optimization method is used to numerically analyze the response results obtained by orthogonal experiments. Analyze the impact of each factor on the optimization goal to select the most reliable optimization. This optimization method can select the best material and component thickness combination scheme. The results show that the mass of the selected parts are reduced by 16.5%; the total energy absorption is increased by 5.2%; the intrusion in the dash is reduced by 8.9%; and the peak acceleration of the B-pillar is reduced by 39.2%.The material-structure integration optimization method is an effective method to solve the contradiction between lightweight and crashworthiness.
Lightweight Design of Automotive Front End Material-Structure Based on Frontal Collision
Sae Int. J. Adv. and Curr. Prac. in Mobility
WCX SAE World Congress Experience ; 2020
Sae International Journal of Advances and Current Practices in Mobility ; 2 , 5 ; 2459-2468
14.04.2020
10 pages
Aufsatz (Konferenz)
Englisch
Lightweight Design of Automotive Front End Material-Structure Based on Frontal Collision
| British Library Conference Proceedings | 2020
Lightweight Design of Automotive Front End Material-Structure Based on Frontal Collision
| British Library Conference Proceedings | 2020
Lightweight design of automotive front rail based on topology optimisation and collision analysis
| Taylor & Francis Verlag | 2024
Structure-material-performance integration lightweight optimisation design for frontal bumper system
| Taylor & Francis Verlag | 2018
Front longitudinal beam energy absorption structure for frontal offset collision
| Europäisches Patentamt | 2020