Experiments are performed in optical engines in order to understand the combustion process in standard engines. In spite of this, little work has been done to verify that the results from optical engines are representative for a standard engine. The wall heat losses in optical engines are lower than in all-metal engines due to the lower heat conductivity of optical parts and a less efficient cooling system. Furthermore, optical engines often have larger crevice volumes due to a lower position of the piston rings. The present investigation studies how these differences affect the heat release and emissions in optical HSDI diesel engines. Five different engine configurations are studied: an optical engine of Bowditch design with two different squish heights, the same engine fitted with a metal piston, the same engine with all quartz parts replaced with metal components and, finally, a standard diesel engine. It is found that the use of optical parts affect the combustion process. The effects can be seen both in the heat release and in the exhaust emissions. They are explained by differences in heat conductivity between the wall materials of the engines investigated. It is shown that the differences can be compensated for by adjusting the inlet temperature.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Heat Release Comparison Between Optical and All-Metal HSDI Diesel Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Johansson, Bengt (Autor:in) / Chartier, Clement (Autor:in) / Egnell, Rolf (Autor:in) / Aronsson, Ulf (Autor:in) / Horn, Uwe (Autor:in) / Andersson, Öivind (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2008



    Erscheinungsdatum :

    14.04.2008




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Heat release comparison between optical and all-metal HSDI diesel engines

    Arnosson,U. / Chartier,C. / Horn,U. et al. | Kraftfahrwesen | 2008


    Exhaust aftertreatment technologies for HSDI diesel engines

    Herzog,P.L. / AVL List,Graz,AT | Kraftfahrwesen | 2000


    Combustion system technologies for HSDI diesel engines

    Herzog,P.L. / Buergler,L. / Gutmann,P. et al. | Kraftfahrwesen | 2004


    Exhaust aftertreatment technologies for HSDI diesel engines

    Herzog,P. / AVL List,Graz,AT | Kraftfahrwesen | 2000


    Heat Transfer Model to Calculate Turbocharged HSDI Diesel Engines Performance

    Arnau, F. / Luján, J. M. / Serrano, J. R. et al. | SAE | 2003