Tire cornering forces are often measured in the laboratory on a high-friction surface and little information exists on the nature of cornering on other surfaces. Thus, the impact of winter roads on vehicle behavior is difficult to fully capture in vehicle dynamics simulations. The CRREL (Cold Regions Research and Engineering Laboratory) Instrumented Vehicle was used to measure cornering forces on winter surfaces. The vehicle was instrumented for forces, speeds, and a variety of other measures. Tests were performed at the Keweenaw Research Center in Northern Michigan, during February 2005, and included measurements on ice, packed snow, and undisturbed snow. Packed snow density was 0.5 g/cm3 and loose snow densities ranged from 0.07 to 0.23 g/cm3 with depths from 5 to 23 cm. The test technique involved towing the vehicle in a straight line while sweeping the steering angle from zero to approximately 17 degrees both left and right. Both front wheels were free rolling and the vertical, longitudinal, and lateral forces were measured at the tire-snow interface. The data were reduced to evaluate the shape of the lateral force v slip angle curves and to compare maximum lateral force coefficients for different winter surfaces. Generally, the force v slip angle curves for ice reach a maximum value and then decrease. The packed snow curves climb more gradually and reach 90% or more of their maximum value by 7 to 10 degrees. The lateral forces for fresh snow surfaces continue to increase throughout the slip angle sweep, particularly for deeper snows.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Tire Cornering Force Test Method for Winter Surfaces


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Coutermarsh, B. (Autor:in) / Shoop, S. (Autor:in)

    Kongress:

    SAE 2006 World Congress & Exhibition ; 2006



    Erscheinungsdatum :

    03.04.2006




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Tire cornering force test method for winter surfaces

    Shoop,S. / Coutermarsh,B. / Cold Regions Res.a.Engng.Lab.,US | Kraftfahrwesen | 2006


    2006-01-1627 Tire Cornering Force Test Method for Winter Surfaces

    Shoop, S. / Coutermarsh, B. / SAE International | British Library Conference Proceedings | 2006


    Tire Cornering/Traction Test Methods

    Beauregard, C. / McNall, R. G. | SAE Technical Papers | 1973


    TIRE CORNERING CHARACTERISTIC EVALUATION METHOD

    NAKANISHI RYOTA | Europäisches Patentamt | 2021

    Freier Zugriff

    Tire cornering stiffness identification method

    WANG PENGWEI / FANG YUYING / CUI KAICHEN et al. | Europäisches Patentamt | 2024

    Freier Zugriff