Laser transmission welding is a relatively new technique for joining thermoplastic components in the automotive industry. Laser energy is passed through a laser-transparent part and dissipated as heat in a laser-absorbent component. There is currently no standardized test to assess the strength of laser transmission welds made using thermoplastic materials. A properly-designed test allows the weld strength of the joint to be measured accurately and rapidly. This paper reports on a technique for measuring overlap shear strength. This study compares two weld orientations (weld line parallel and perpendicular to assembly loading) using polycarbonate, polypropylene, polyamide 6, polyamide 6 reinforced with 30% glass fibres and polyamide mXD6 reinforced with 50% glass fibres. Assemblies were made using a range of laser powers. In order to simulate industrial conditions, artificial gaps were also introduced between the transparent and absorbent parts.Both weld orientations provided similar results when no gap was present between the transparent and absorbent parts. Weld orientations parallel to the direction of loading were observed to give more reliable results once a gap is placed between the parts. The importance of test specimen dimensions to prevent assembly failure in the bulk material during testing and the effect of other geometric parameters are also discussed.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Method of Evaluating Shear Strengths in Contour Laser Transmission Welding


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Baylis, Bobbye (Autor:in) / Zak, Gene (Autor:in) / McLeod, Martin (Autor:in) / Chen, Mingliang (Autor:in) / Bates, Phil (Autor:in)

    Kongress:

    SAE World Congress & Exhibition ; 2007



    Erscheinungsdatum :

    16.04.2007




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Method of evaluating shear strengths in contour laser transmission welding

    Chen,M. / Bates,P. / Baylis,B. et al. | Kraftfahrwesen | 2007


    Method of Evaluating Shear Strengths in Contour Laser Transmission Welding

    Chen, M. / Zak, G. / Bates, P. et al. | British Library Conference Proceedings | 2007


    Evaluating contour segment descriptors

    Yang, C. / Tiebe, O. / Shirahama, K. et al. | British Library Online Contents | 2017



    99055 Laser Welding on three-dimensional contour for auto body manufacturing

    Hisano, H. / Sakamoto, Y. / Muta, H. et al. | British Library Conference Proceedings | 1999