In one of the fatigue tests for wet friction materials, “bump test”, an inertia-type rig equipped with a multi-disk assembly is used. One of the steel disks in the assembly has radial bumps for the purpose of creating high local contact pressure and high temperature. Due to the severe contact conditions, a comparative testing for different friction materials can be conducted within a relatively small number of cycles. In the paper, a design of a “bump” assembly used for automotive wet friction materials is described. Based on both experimental tests and advanced contact modeling, non-uniform contact pressure generated by the bumps and resulting temperature are estimated. The computational model is used then to study the influence of the modulus of elasticity of the friction material and reaction plate thickness on the contact conditions. The bump fatigue tests lead ultimately to material failure. The modes of the failure obtained during the tests are demonstrated and commented on in the paper.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    “Bump Test” of Wet Friction Materials: Modeling and Experiments


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2001 World Congress ; 2001



    Erscheinungsdatum :

    05.03.2001




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Bump test of wet friction materials: modeling and experiments

    Zhao,W. / Zagrodzki,P. / Raytech Composites,US | Kraftfahrwesen | 2001


    2001-01-1154 "Bump Test" of Wet Friction Materials: Modeling and Experiments

    Zhao, W. / Zagrodzki, P. / SAE | British Library Conference Proceedings | 2001


    US 'bump' test beaten

    Tema Archiv | 1974


    Optimization of front bump steer using design of experiments

    Suh,K.H. / Lee,Y.K. / Yoon,H.S. et al. | Kraftfahrwesen | 2000