The isostatic strength of porous cordierite ceramic monoliths plays an important role during canning and subsequent operation of automotive catalysts. Its value depends on wall porosity, cell geometry, skin thickness and morphology, monolith size and contour, and substrate/washcoat interaction. If the stresses induced by canning loads and closure speeds exceed the isostatic strength, the monolith may exhibit either crushing or shear type failure.This paper presents the room temperature isostatic strength data for coated and uncoated ceramic monoliths of different contour, size, and cell geometry. The applied isostatic load on the monolith is translated into stresses in the porous cell wall using both an analytical model and finite element analysis. It is found that the failure criteria are governed by the fundamental tensile and compressive strengths of the cell wall. The addition of alumina washcoat increases the isostatic strength as long as the substrate/washcoat interaction is carefully controlled during the coating process. The higher isostatic strength of coated monoliths facilitates the canning process and permits higher holding pressure, thereby enhancing their physical durability over the specified lifetime of the vehicle.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Isostatic Strength of Porous Cordierite Ceramic Monoliths


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Congress & Exposition ; 1991



    Erscheinungsdatum :

    01.02.1991




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Isostatic strength of porous cordierite ceramic monoliths

    Gulati,S.T. / Chen,D.K. / Corning Glass,US et al. | Kraftfahrwesen | 1991


    Isostatic strength of extruded cordierite ceramic substrates

    Gulati,S.T. / Widjaja,S. / Xu,W. et al. | Kraftfahrwesen | 2004


    Isostatic Strength of Extruded Cordierite Ceramic Substrates

    Treacy, D. R. / Yorio, J. A. / Widjaja, S. et al. | SAE Technical Papers | 2004


    Isostatic Strength of Extruded Cordierite Ceramic Substrates

    Gulati, S. T. / Widjaja, S. / Xu, W. et al. | British Library Conference Proceedings | 2004


    2004-01-1135 Isostatic Strength of Extruded Cordierite Ceramic Substrates

    Gulati, S. T. / Widjaja, S. / Xu, W. et al. | British Library Conference Proceedings | 2004