Experiments have been conducted in a firing single-cylinder spark-ignition engine employing a Ford Zetec cylinder head that has been modified to operate with either standard port-fuel-injection, air-forced port-fuel-injection or direct-injection. The engine utilizes a fused silica cylinder and therefore provides extensive optical access to the combustion chamber. Tests were conducted using a constant speed simulated cold start procedure, which is composed of an initial start-up transient and a quasi-steady-state idle period. In this procedure, the engine is briefly motored at 889 rpm and then combustion commences shortly after the start of fuel injection. Measurements which were performed include in-cylinder pressure as well as intake valve, exhaust valve, piston, cylinder, head, and intake air temperature throughout each cycle of the test period. The engine-out total hydrocarbon emissions were also measured. Engine start quality is quantified by the length of the initial start-up period and the stability of the quasi-steady-state idle. Based on these two parameters, the influence of three fuel injection systems, operating temperature, ignition timing, and injection timing on the engine performance during cold start are presented and discussed. In addition, the pre-combustion fuel distribution is measured using two-dimensional laser-induced fluorescence. The pre-combustion fuel distribution images of the three injection systems at different crank angles and times during the test are presented and discussed relative to engine performance.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Comparison of Fuel Distribution and Combustion During Engine Cold Start for Direct and Port Fuel Injection Systems


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Quay, Bryan D. (Autor:in) / Santavicca, Domenic A. (Autor:in) / McGee*, Jeff M. (Autor:in) / Lee, Sihun (Autor:in)

    Kongress:

    International Fuels & Lubricants Meeting & Exposition ; 1999



    Erscheinungsdatum :

    03.05.1999




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    A Comparison of Fuel Distribution and Combustion During Engine Cold Start for Direct and Port Fuel Injection Systems

    Lee, S. / McGee, J. M. / Quay, B. D. et al. | British Library Conference Proceedings | 1999


    Port-Fuel-Injection Gasoline Engine Cold Start Fuel Calibration

    Tagomori, Mauro K. / Henein, Naeim A. / Luan, Yunfei | SAE Technical Papers | 2006


    Analysis of Cylinder Wet Distribution during Cold Start of a Port Fuel Injection Engine

    Takahashi, Y. / Katou, Y. / Tomimatsu, M. et al. | British Library Online Contents | 2009


    Quantitative Analysis of Intake Port and Cylinder Wet during Cold Start of a Port Fuel Injection Engine

    Takahashi, Y. / Katou, Y. / Tomimatsu, M. et al. | British Library Online Contents | 2009