The automotive industry has shown a growing interest in tube hydroforming during recent years. The advantages of hydroforming (less thinning, a more efficient manufacturing process, etc.) can, for instance, be combined with the high strength of extra-high-strength steels, which are usually less formable, to produce structural automotive components which exhibit lower weight and improved service performance. Design and production of tubular components require knowledge about tube material and forming behaviour during hydroforming and how the hydroforming operation itself should be controlled. These issues are studied analytically in the present paper. In this study, the whole process of rear subframe parts development by tube hydroforming using steel material having a tensile strength of 440MPa is presented. At the part design stage, it requires a feasibility study and process design assisted by computer aided engineering to confirm hydroformability in detail. The effects of parameters such as internal pressure, axial feeding, and geometry shape in the automotive rear subframe by the hydroforming process were carefully investigated. The overall possibility of hydroformable rear subframe parts could be examined by cross-sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending and hydroforming. In addition, all the components of a prototyping tool are designed and interference with a press is examined from the point of geometry and thinning.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of an automotive rear subframe by the tube hydroforming process


    Beteiligte:
    Kim, K J (Autor:in) / Won, S T (Autor:in) / Lee, Y H (Autor:in) / Bae, D S (Autor:in) / Sung, C W (Autor:in) / Paik, Y N (Autor:in)


    Erscheinungsdatum :

    01.11.2008


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Development of an automotive rear subframe by tube hydroforming process

    Kim,K.J. / Won,S.T. / Lee,Y.H. et al. | Kraftfahrwesen | 2008


    REAR SUBFRAME

    KAWACHI TAKESHI / KIMOTO NAOKI / SONOBE SOMA | Europäisches Patentamt | 2021

    Freier Zugriff

    REAR SUBFRAME STRUCTURE

    TANAKA MASAAKI / KOMIYA KATSUYUKI | Europäisches Patentamt | 2017

    Freier Zugriff

    REAR SUBFRAME STRUCTURE

    TANAKA MASAAKI / KOMIYA KATSUYUKI | Europäisches Patentamt | 2017

    Freier Zugriff

    Rear subframe assembly

    WANG WEI / CHI MING / DING WEIDONG et al. | Europäisches Patentamt | 2024

    Freier Zugriff