Trailing edge-integrated lobed-mixing geometries are proposed as a viable method for road vehicle aerodynamic drag reduction. Experiments are conducted on a 1/24th-scale model, representative of a Heavy Goods Vehicle, at a width-based Reynolds number of 2.8 × 105. A broad range of pitches and penetration angle values is examined, with detailed comparisons also made to high-aspect-ratio rear tapering. Changes to mean drag coefficients and wake velocities are evaluated and assessed from both the time-independent and time-dependent perspectives. Results show significant drag reductions for lower pitches at higher penetration angles, where the performance of regular tapering is found substantially degraded. The mechanisms responsible for drag reduction are identified to be reductions in the wake size and a shift in the vertical wake balance. The former is shown to be a result of the enhancement in inboard momentum close to the trailing edges through the generation of pairs of counter-rotating streamwise vortices, with the latter attributed to the downstream evolution of the vortices. Overall, these results identify such geometries to be suitable for improving vehicle drag while minimising the losses in internal space.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    On the drag reduction of road vehicles with trailing edge-integrated lobed mixers


    Beteiligte:


    Erscheinungsdatum :

    01.06.2022


    Format / Umfang :

    31 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Noise reduction with lobed mixers - Nozzle-length and free-jet speed effects

    Mengle, Vinod / Dalton, Willam / Bridges, James et al. | AIAA | 1997


    Velocity Measurements Downstream of a Lobed Forced Mixer with Different Trailing Edge Configurations

    Yu, S. C. M. / Yeo, J. H. / Teh, J. K. L. et al. | British Library Conference Proceedings | 1994



    Velocity Measurements Downstream of a Lobed Forced Mixer with Different Trailing Edge Configurations

    Yu, S. C. M. / Yeo, J. H. / Teh, J. K. L. et al. | British Library Conference Proceedings | 1994