Wheel flat is a form of wheel tread defect that reduces the service life and running safety of trains and tracks. Based on the multi-body system dynamics theory, a rigid-flexible vehicle-turnout dynamic coupling modelwas established, and the wheel diameter-varying flat simulation method used to create wheel flat models of different sizes. The most unfavourable phase of flats on the wheels of a vehicle crossing a turnout was studied by scanning and calculating the phase of the flats. The influence of flat size and vehicle speed on a vehicle with flats crossing a turnout was also analyzed. The results show that, compared with a normal wheel crossing a turnout and a wheel flat acting on the interval rail, a wheel flat acting on the wheel load transition of the frog area will excite greater vertical wheel-rail forces and vertical axle box vibration acceleration; in the turnout area, the main frequency band of the vertical vibration acceleration of the axle box is 550–800 Hz, which is rarely affected by the size of flats or the speed of the vehicle. The third-order bending mode of the wheel is excited when the wheel transits from the wing rail to the point rail.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of wheel flat on dynamic wheel-rail impact in railway turnouts


    Beteiligte:
    Xu, Jingmang (Autor:in) / Ma, Qiantao (Autor:in) / Zhao, Siqi (Autor:in) / Chen, Jiayin (Autor:in) / Qian, Yao (Autor:in) / Chen, Rong (Autor:in) / Wang, Ping (Autor:in)

    Erschienen in:

    Vehicle System Dynamics ; 60 , 6 ; 1829-1848


    Erscheinungsdatum :

    03.06.2022


    Format / Umfang :

    20 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    Wheel-Rail Multi-Point Contact Method for Railway Turnouts

    Chen, Zhi Wei ;Li, Linan ;Sun, Shi Gang | Trans Tech Publications | 2011


    Wheel-Rail Multi-Point Contact Method for Railway Turnouts

    Chen, Z.W. / Li, L.A. / Sun, S.G. et al. | British Library Conference Proceedings | 2011


    Fatigue life analysis of wheel-rail contacts at railway turnouts using finite element modelling approach

    Jelila, Yohanis D. / Lemu, Hirpa G. / pamula, Wiesław et al. | BASE | 2021

    Freier Zugriff

    Simulation of wheel/rail interaction in turnouts and special track work

    Gurule, S. / Wilson, N. / International Association for Vehicle System Dynamics | British Library Conference Proceedings | 2000


    A dynamic wheel–rail impact analysis of railway track under wheel flat by finite element analysis

    Bian, Jian / Gu, Yuantong / Murray, Martin Howard | Tema Archiv | 2013