Laser welding has the potential of offering both technical and economical advantages in many applications in the shipbuilding industry. A limiting factor is currently the power level available with commercial lasers, since steel plates above 5 mm in thickness are used in almost every shipbuilding application. In addition, the high hardness of the welds produced using laser welding is a disadvantage when compared with the requirements of existing classification society standards. It has been reported that by using a hybrid welding method, in which a laser beam and a GMAW arc are combined, it is possible to weld thicker sections, because penetration is increased. Hardness values are correspondingly lower than with the laser process because of the increased energy input. Results of a study of hybrid high power Nd:YAG laser and GMA welding are reported. All plates were welded in a butt joint configuration. When laser and GMAW were combined in a single process, I-grooves were used. The air gaps between the welded plates were varied. Some tests were made using a partially-grooved V joint. In these cases, the root faces were welded by using Nd:YAG laser, and the upper part of the joint was welded by GMAW. It was seen that it is possible to produce defect-free welds using these processes. Macrosections of the welds, hardness values and parameters are presented.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Welding of ship structural steel A 36 using Nd:YAG laser and GMAW


    Weitere Titelangaben:

    Schweißen von Schiffbaustahl A 36 mittels Nd-Yag-Laser und Schutzgasschweißen


    Beteiligte:
    Jokinen, T. (Autor:in) / Vihervä, T. (Autor:in) / Riikonen, H. (Autor:in) / Kujanpää, V. (Autor:in)


    Erscheinungsdatum :

    1999


    Format / Umfang :

    7 Seiten, 7 Bilder




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Nd:YAG Laser Welding of Zinc-coated Steel Sheet

    Fukui, K. / Fujimoto, H. / Yasuyama, M. et al. | British Library Conference Proceedings | 1998


    Nd:YAG Laser Welding of Zinc-coated Steel Sheet

    Fujimoto, Hiroki / Fukui, Kiyoyuki / Yasuyama, Masanori | SAE Technical Papers | 1998


    Nd:YAG laser welding of zinc-coated steel sheet

    Fukui,K. / Fujimoto,H. / Yasuyama,M. et al. | Kraftfahrwesen | 1998


    Multispot - Welding with Nd:YAG-Laser

    Bachhofer, A. | British Library Conference Proceedings | 1997


    Multispot - Welding with Nd:YAG-Laser

    Bachhofer, A. | British Library Conference Proceedings | 1997