Compared are the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits. As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level - energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer, about 21 years, for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Life cycle energy impacts of automotive liftgate inner


    Weitere Titelangaben:

    Energiebilanz im Lebenszyklus eines Automobilfahrzeugs


    Beteiligte:
    Das, Sujit (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2005


    Format / Umfang :

    16 Seiten, 22 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    LIFTGATE INNER DIE CAST PROFILE

    REJC SCOTT W / EBERLE JR CLIFFORD L | Europäisches Patentamt | 2016

    Freier Zugriff

    LIFTGATE INNER DIE CAST PROFILE

    REJC SCOTT W / EBERLE CLIFFORD L JR | Europäisches Patentamt | 2016

    Freier Zugriff

    Thermoplastic liftgate inner panel construction

    MARK P BIRKA | Europäisches Patentamt | 2015

    Freier Zugriff

    Liftgate inner die cast profile

    REJC SCOTT W / EBERLE JR CLIFFORD L | Europäisches Patentamt | 2016

    Freier Zugriff

    Tailor-Welded Aluminum Blanks for Liftgate Inner

    Zhang, L. / Kariat, S. / Zhou, Y. J. et al. | SAE Technical Papers | 2007