The aim of this paper is to present how springback can be controlled when the electromagnetic forming technique (EMF) is used as a second corrective step; bringing formed parts to the desired final shape by means of magnetic impulses in critical areas (residual stress) of the formed components. This analysis is based on the results of two experimental studies. In the first, the selected preformed specimen shape is the L-shape bent part of HSS DP600, in 0.8 and 1.95 mm thickness, and Aluminium Alloy 5754, in 1 and 2 mm thickness. The second geometries are two rocket nozzle panels made of a thick but soft copper alloy. While the geometry and the material are the similar, the first approach of this work was developed using smaller panels (about 30 cm long) and the full size (about 1 m long), in order to study the behaviour of the material and the approximate energy levels required to scale up the full size panels. The experimental results reveal that the most important 'new' parameter to take into account on this process is the conductivity of the material. Overall this study shows EM forming can have a potent effect in controlling springback. The tooling for this method is relatively simple and very flexible even to couple it into an industrial configuration.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Electromagnetic springback reshaping


    Beteiligte:
    Iriondo, E. (Autor:in) / Gonzalez, B. (Autor:in) / Gutierrez, M. (Autor:in) / Vonhout, V. (Autor:in) / Daehn, G. (Autor:in) / Hayes, B. (Autor:in)


    Erscheinungsdatum :

    2006


    Format / Umfang :

    8 Seiten, 10 Bilder, 2 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Springback Determination By Springback Index Approach

    Ma, Hongwei / Sun, Shuwen / Wang, Zhirui | SAE Technical Papers | 2005


    Springback Elimination in Structural Components by Means of Electromagnetic Forming

    González, Beatriz / Daehn, Glenn S. / Eguía, Iñaki et al. | SAE Technical Papers | 2009


    Springback Adaptive-Predictive Control

    Constantin, I.C. / Epureanu, A. / Paunoiu, V. et al. | British Library Conference Proceedings | 2008


    Springback type trundle device

    YANG FAN / YE SHUHONG / JIANG KUNDE et al. | Europäisches Patentamt | 2021

    Freier Zugriff

    METHOD FOR REDUCING SPRINGBACK AND APPARATUS FOR ANALYZING SPRINGBACK OF PRESS FORMED PARTS

    SAITO TAKANOBU | Europäisches Patentamt | 2015

    Freier Zugriff