A three-dimensional elastic-plastic finite element model was used to investigate the relative effects of different joint forms on the welding distortion and residual stresses in an automotive differential assembly due to deep-penetration high-energy welding. Numerical studies were carried out to determine optimal selections of heat generation rate and the number of weld segments to ensure both computational efficiency and accuracy of the calculation. To model the constraints and boundary conditions realistically, contact elements were used at the mating surfaces of different structural components and the shrink fit between the gear and differential case was modeled using couple sets. Two situations representing welded gear-case assemblies where the welded joints were oriented at 0 deg and 30 deg with respect to the radial direction were analyzed. Predicted welding distortions and residual stresses are compared and discussed in detail. The results indicate that the residual tensile stresses in the 0 deg radial joint are larger than those in the 30 deg angled joint and that residual distortion is sensitive to joint form.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A comparative study of the residual deformation of an automotive gear-case assembly due to deep-penetration high-energy welding


    Beteiligte:
    Zhang, Linjie (Autor:in) / Zhang, Jianxun (Autor:in) / Kalaoui, Hussein (Autor:in) / Li, Huaxin (Autor:in) / Wang, Yenkai (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2007


    Format / Umfang :

    8 Seiten, 12 Bilder, 1 Tabelle, 11 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Study of deep-penetration welding of gear with CO2 laser

    Zheng,Q. / Tao,X. / Li,J. et al. | Kraftfahrwesen | 1992


    Vapour flow modelling in deep penetration laser welding

    Amara, E.H. / Fabbro, R. / Bendib, A. | IEEE | 2003


    Automotive worm gear

    Buckendale, L.R. | Engineering Index Backfile | 1929


    Gear Whine Noise Due to Deformation- A Case Study

    Joshi, Yashodhan V. | British Library Conference Proceedings | 2017


    Gear Whine Noise Due to Deformation- A Case Study

    Joshi, Yashodhan V. | SAE Technical Papers | 2017